Jump to content
SAU Community

Rb25det Neo Needs Some Revs To Help It Start?

DoseVader

By DoseVader,
in General Maintenance

 Share

Recommended Posts

DoseVader Enthusiast

DoseVader

Posted
Posted

Hi Guys,

So basically I had 550cc injectors, Z32 AFM and a highflow installed in my r34 and ever since getting the car back from being tuned while starting the car i need to give the car some revs while turning the key to get it stated, the warmer the car the more revs that are needed to get it started. Any ideas what might be causing this, I am really hoping it's just a shitty tune as the car was never doing this before?

I am thinking about getting the car retuned in a couple of weeks at a different shop but just want to see what other people think to try eliminate other factors first.

Ben C34 Grand Master

Ben C34

Posted
Posted

Sounds like a shit tune as it wasn't doing it before.

I would ask who ever tuned it to fix it. But realistically I would probably just want to go somewhere who knows what they are doing. if they can't get it to start nicely I wonder how bad the rest of the tune is.

  • Like 1
DoseVader Enthusiast

DoseVader

Posted
  • Author
Posted

Injectors are brand new so too so fuel should be flowing pretty freely through them. Not going to name the shop that tuned it but they are ranked one of the better ones in QLD. Last time they tuned my car it was hitting boost cut in second gear and would not rev past 4,000rpm so I took it back but don't think I will this time will just change shop all together.

89CAL Grand Master

89CAL

Posted
Posted

You dont give it any revs if the car is running

I think you mean you need to press the throttle pedal

If you need to give it some throttle, then you need to give it more air, sounds like the car is to rich on start up

cranking enrichment needs adjustment

What ECU?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By r32-25t · Posted

      They’re so great that I know of someone pulling one out to go back to a sequential 
    • Kinkstaah
      R34 GTR Front Diffuser/Guard Liner questions.

      By Kinkstaah · Posted

      Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
    • MBS206
      Cold compression test after rebuild... should I be worried?

      By MBS206 · Posted

      And most chargers that most DIY people own would put bugger all power back into the battery between cylinders. I've always done it with jumper packs/second battery connected. And that's on any car.   Because race car, and wanting the lightness.  At least in an R33, putting a bigger battery in can at least help shift the weight balance backwards  
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      OR, Tell the Motec to STFU, you said shift, so try shifting! But then yes, I agree, more sensors needed to. Put either a wheel speed sensor, or a diff speed sensor on it. Then get an input shaft speed sensor too. (I say input shaft speed, and not engine RPM). This way, you can now also log and see if the clutch is slipping (RPM, vs input shaft speed), and you can calculate gear (Input shaft speed / Output shaft speed). At least then if the gear position sensor fails you have a backup. And realistically, the Motec should only worry about what gear you're in for the parts where I'm assuming you have some power management strategies in it for the lower gears. (IE, lower boost, maybe different throttle curves, different ignition curves, etc etc). But it should stop it shifting. Pull the flappy, that f**ker should just attempt the motion! Heck, even on a sequential like on a motorbike, you can keep trying to kick it up a gear all you want, the physically part of the box takes care of not being able to loop the whole way around the box! Only part you'd have to worry is how it gets to reverse.  But that's on the driver... An R32 shouldn't be so smart as to try and override the driver on a gear shift  
×
×
  • Create New...