Jump to content
SAU Community

Recommended Posts

Hello so I've brought a R33 Gtst. My first ever turbo car. Im looking to get it around 350 HP at the wheels. Now I've been doing a bit of research and I think I've found a good list of parts I need to make this possible. Just want to see what you guys think before I blow all my money. (Car at the moment is bog stock. Car is also automatic. I kind of want it for drags and circuit. I know manual is better but my daily is manual I wanted something different)

Parts:

-Intercooler

-Turbo smart boost tee & Boost guage

-Nismo 555cc injectors

-Turbo gt3037 (do I need better?)

-Apexi power intake

-Walbro 255 L/PH fuel pump

-Low mount & dump pipe

-R33 S2 AFM (Or Z32?)

-Lightweight pully kit

-And a tune (what's best tune to get).

This car is a track car so not ever going to be road legal so dont mind if I have to straight pipe or what ever.

Would that be enough to make 350 HP at the wheels? Or would I need a few more upgrades. Money isnt too much of an issue but would rather keep it below 2-3k.

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/452592-r33-350-hp-build-need-help/
Share on other sites

if you feel like saving money then just get a hypergear highflow done to your turbo.Those injectors and 18psi on petrol will make 350rw ponies easy.

Adaptronic ecu is much better than a nistune + Z32 afm

  • Like 1

Although 3k might be a little optimistic as around 2k for ecu and turbo, then it needs tune for around 60-1000 depending on where you go, then there's still a fmic kit and exhaust

Guess I'll be spending more money then haha

hyper gear high flow 850.

full 3 inch exhaust and dump, 2-400 drift sales.

injectors and fuel rail, again bargains to be had second hand, 2-800

tune 750

emanage blue 200 dollars or power fc 6-900

fuel pump 100 bucks.

e85.

will make your power figure easily.

  • Like 1

Have you played with the cam timing on the 32 ?

I see in your sig your 33 has a fair few bolt ons, what does the 32 have ?

I guess its your 32 that has 271kw ( if written respectively) plus the 32 GTR is 40kg heavier then the 33 GTS-t and there's fark all difference :/ , try getting the LCAs of the 32 cams to 110-108deg and see if there is still fark all difference :D

or try taking your motor thats been dialed in, and doing power runs at a further 20 degree intake retard, or a 20 degree advance, and see if there are any areas where you can from the extra advance, this will show you the use for vct

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...