Jump to content
SAU Community

Parts Clean Out! R32/33 Gtr Nismo Trust Greddy Cusco Ksp Attain Rasty Fj20 Rb26

CameronBNR32

By CameronBNR32,
in Classifieds

 Share

Recommended Posts

CameronBNR32 Proficient

CameronBNR32

Posted
Posted

I have sold my GTR so no longer need the parts/spares.

All parts are located in Brisbane south side, and inspections are welcomed, just message me on here or email me and I will try and get back to you as soon as I can.

I will post at buyer's expense, so if you are located elsewhere and if you are interested, please contact me for a quote on freight.

Images are located for all the parts here: http://www.sau.com.au/forums/gallery/album/5783-classifieds-images/

Thank you.

BCNR33 GTR Skyline RB26DETT Camshaft/Timing Covers

One of the camshaft covers has been damaged with a part of it snapped off.

$150

FJ20 Cylinder Head with front cover/oil pump

Bare FJ20 cylinder head

Front Cover with Oil Pump

$500

Trust/Greddy Hard Intercooler Pipes

Only have two of the pipes out of the set of four.

$100 each

Greddy T78 33D Turbo

http://www.trust-power.com/spec_swf/02turbo/Turbo%20Chargers.htm

Split pulse design, rated at 720hp

Removed due to going to a twin turbo setup

$1500

Greddy Type R Wastegate

http://www.trust-power.com/02turbo/waste_gate_valve.html

http://www.trust-power.com/spec_swf/02turbo/GReddy%20%20Waste%20Gate%20%20Valve.htm

Removed due to going to a twin turbo setup

$500

Greddy Type R Split Pulse High Mount Exhaust Manifold

http://www.trust-power.com/02turbo/sus_turboex_manifold.html

http://www.trust-power.com/spec_swf/02turbo/Sus.Turbo%20Ex.%20Manifold.htm

Stainless Steel Split pulse design.

Removed due to going to a twin turbo setup

$1000

Greddy Heat Shield

http://www.trust-power.com/02turbo/heat_insulator.html

Removed due to going to a twin turbo setup

$50

R33 GTR Dash Cluster

Reason for removal was swapped out for an aftermarket cluster.

Has 26,000km on Odometer.

$300

R33 GTR Fuel Pump Controller

$50

R33 GTR YAW Rate Sensor

$100

R33 GTR RB26DETT Alternator

$100

BCNR33 GTR Skyline N1 Centre Triple Gauge Cluster

R33 GTR N1 centre triple gauge cluster

Worked perfectly before being removed from the vehicle

$100

Nissan Skyline GTR RB26DETT Carbon Fibre Timing Belt Cover

Unknown Brand

I impulse bought it when I was in Japan.

$50

Nismo Skyline BCNR33 Series 3 Front under Diffuser

http://www.nismo.co.jp/products/catalogue_2014/#page=265

Genuine Nismo S-Tune aero body kit front under bumper spoiler for the Skyline BCNR33 R33 GTR Nismo S-Tune front bumper.

Paid around $1000 and then realized it wouldn’t fit!

$500

Nissan Skyline BCNR33 GTR N1 RB26DETT Air Box and Snorkel

Nissan Skyline BCNR33 GTR N1 Air Box and Snorkel

K&N Air Filter

$250

RB26DETT Air Flow Meters

These were working fine before being removed from the vehicle, one is genuine and one looks aftermarket.

$100 for the pair

Trust/Greddy 3.7” “Power Extreme” Ceramic Coated Stainless Steel Exhaust with Custom Front/Dump Pipe

Hardly used, was only pulled off due to going back to a twin turbo setup on the car.

Custom made dump/front pipe to suit 4 Bolt turbo exhaust flange. No catalytic converter. :whistling:

$600

KSP Racing Equipment / Attain Carbon Kevlar Rear Bumper Cover to suit Nissan Skyline R33 GTST or GTR

http://www.ksp-eng.co.jp/ATTAIN/exterior/36.html

Brand New still in box

KSP/Attain Brand

Carbon Kevlar

$150

Rasty FRP Boot for Skyline R33 GTR/GTS-T

http://www.rasty.tv/pro/trunk.html

Flat Truck Style painted in QM1 White

Some Cracks in the paint where the wing was mounted.

Very light

$450

R33 GTR Front Lower Arms

Stock R33 GTR Front lower arms with ball joints.

$150 for the pair

Nismo Clear Indicators

Brand New Still in Box.

$80

R33 GTR R200 Competition Diff

Brand New Cusco 2 way Center

Brand New Crown Well and Pinion

Trust/Greddy Extended High Capacity Diff Cover

http://www.trust-power.com/16power_train/diff_cover.html

http://www.trust-power.com/spec_swf/05engine/DiffCover_Up_Grade_Kit.htm

Diff Cover has also been modified to clear a close fitting exhaust

4.11 Ratio

$2000

R32 GTR Dash Speedo

Reason for removal was only due to being swapped out for an aftermarket cluster.

52,000km on Odometer.

$250

R32 GTR Factory Suspension

Inserts and springs.

They were removed while they were still in good working cond.

$400

R33 GTR ABS Unit

Removed from the car only due to installing a pedal box set up.

$250

R33 GTR Washer Bottle and Motors

Very good condition.

$50

R33 GTR RB26DETT Cylinder Head

Complete cylinder head with coil packs.

Was running perfectly and was only pulled off the engine with the intent to build the bottom end, never happened.

$1250

RB26DETT Ind. Throttle Bodies and Plenum.

Was running perfectly and was only pulled off the engine with the intent to build the bottom end, never happened.

$400

RB26 Starter Motor

Was working perfectly and was only pulled off the engine.

$100

R33 GTR Sump and Factory Front Diff

Was running perfectly and was only pulled off the engine with the intent to build the bottom end, never happened.

$300

  • 1 month later...
  • 1 year later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...