Jump to content
SAU Community

Recommended Posts

I have already spoken to Hornet about this. I'm keen for a group buy if there's enough interest. I'm not in a rush so I was hoping GKTech would come out with their version sooner or later.

GkTech 'design' doesn't fit z32 & I'm not super thrilled with some of their feedback I've seen.

Member Boosted Zed is actually John, the owner of UAS & I know another member (fatz?) has run a group buy in the past

GkTech 'design' doesn't fit z32 & I'm not super thrilled with some of their feedback I've seen.

Member Boosted Zed is actually John, the owner of UAS & I know another member (fatz?) has run a group buy in the past

Where did you see feedback/info about the GKtech UCA's?

Nothing on the uca's obviously because they haven't built them, that said the design won't fit on a z32 in it's current form. Feedback relates to other suspension arms that 300 members have purchased & the overall quality they found. Then there's the fact that a lot of their parts labelled as fitting z32 don't actually fit on a z32...

I've purchased SPL arms for all my other adjustable arms & while they cost more the quality is fantastic, my only remaining issue is the fuca's which are currently just generic midori style arms. It doesn't look like SPL's will come to market anytime soon so I'll be going UAS when I get the chance.

GKTech are designing something.

In the meantime, Hardrace seem to be pretty decent. I have SRI (red ones) from JustJap, they've been working fine for a couple of years.

niZmO_Man to the rescue!! Came through with a set of Hardrace arms for me. Legend!

Thanks for all the input guys. I think I will still see what GKTech come out with, and/or go with UAS option in the long run, but these will certainly get me out of the tricky spot I am in.

Get some pics up of the broken arm.

Will do - I put the new ones in on Tuesday... took me longer than I thought it would, but all good now. The clunking/groaning/knocking sound I have become accustomed to has stopped which is good, and the front actually feels a bit tighter. I will take a pic of the old busted one when I get home.

A little hard to see in the picture, but the thread is stripped and the threaded part is actually cracked right through. The threaded section just slides in and out lol... so glad it finally let go on the driveway, and not on either the skidpan, or the freeway on the way home.

post-118673-0-51770100-1424421963_thumb.jpg

  • 2 months later...

A little hard to see in the picture, but the thread is stripped and the threaded part is actually cracked right through. The threaded section just slides in and out lol... so glad it finally let go on the driveway, and not on either the skidpan, or the freeway on the way home.

How much castor were you running when that happened?

Garage88 eastern creek.picture says s thousand words about $450 off memory...attachicon.gifImageUploadedBySAU Community1429708384.269795.jpg

They look a lot like the ones i have, and are still going well after many years. My ones were from Notlec, who later went out of business. Other Noltec stuff was shit - radius rod bushes from them fell apart. Superpro replacement rod bushes are going well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...