Jump to content
SAU Community

Recommended Posts

I just bought a 2006 V36 250GT here in Christchurch, NZ. It's actually a temporary car while I wait for an ideal Skyline Crossover (370GT) with allt he right specs to become available.

After only a couple of days however, I really like the 250GT. it's comfortable, quiet, looks great and decent on fuel.

I asked the dealer to make sure that it had two smartkeys, and he said it had one plus a remote starter. In an email confirming the sale I asked the following.

"Confirmation that remote starter works as second smart key (as a backup in case key is lost)"

And he replied

"Ricky is working on the spare key and it is work" (Sic)

When I picked up the car, he demonstrated the remote starter (pictured below), starting the car, but it was on the same keyring as the genuine Smartkey.

Only when I got home and took the remote starter off thte keyring to put in a safe did I test it while out of range of the smartkey, and sure enough, it didn't work. When I got in the car and tried to start it (with the pushbutton) the dash displayed the "no key" notification.

I've found that Nissan can supply a genuine additional Smartkey for $450 which all things considered, isn't too bad - however a couple of questions for the experts here...

Should the remote starter be able to function as a key for the vehicle all on it's own?

With the right consult cable and a smartkey from Ebay, should I be able to program the car to accept the new key myself? (I have the small metal tag with a 5 digit PIN on it "0xxxx"). I have read the long threads on here but I'm afraid I didn't see a clear conclusion apart from it was easier to find a dealer that knew what to do.

i-vWKdDVf.jpg

Cheers - Neil G

Hi Neil,

Welcome to the forum.. i also have a Nissan remote starter and it is, unfortuately, as it says, a remote starter. On mine it is also for the alarm, but it will not allow me to start the car as normal. Lives in the draw with the rest of the import car owner stuff that never gets used...

  • 3 weeks later...

That's pretty average. So one remote for starting the vehicle remotely and another for actually starting the vehicle whilst occupied? Seems a bit silly of them not to combine the functionality in the remote starter keyfob.

But then again, I have my smart key and Viper alarm remote on my keyring so I guess it's the same thing. :P

Thanks for the confirmation people... By way of followup I asked the dealer I bought the car form (politely) how to use the remote starter as a key (before I read the replies here) and he said he'd look into and call me back.

He did call me back the next day, apologised for putting me wrong initially and said he'd booked me in with a local Nissan dealer to get a new smartkey supplied and coded at his cost. Very impressed. Absolutely no BS from the seller at all.

Still liking the car but it's only a temporary one until I find the perfect Skyline Crossover (370GT)... There's not enough of them around and almost none have the technology pack (Cruise, LDW/LDP, IBA, Around view monitor etc)

Cheers - N

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...