Jump to content
SAU Community

Recommended Posts

Well I've been training weights for about the last three years with reasonable progressions in some areas and pretty poor progression in others...

Have spent the last couple of weeks reading through Markos' thread 'Powerlifting'......much of the time in awe ha-ha.

To date I've just been training at home and only had a proper squat/power rack that I built for the last 12 months or so along with one strongman session per week (yoke, farmers walks, log etc.......).

My best mate is a PT and has just secured himself a warehouse where it will be focussed around 'Powerlifting', 'Weightlifting' & 'Strongman'.

In return for me fabricating some of the equipment I will be able to train there for free which I believe/hope will certainly help me progress especially for those times where I perhaps haven't gone for that extra rep, set, weight etc. (we all do it even if only subconsciously) and just having other lifters around can only be a good thing......

My current stats are as follows: 30yrs of age, 175cm @ 82ish kg

Current 1RM deadlift = 200kg

Current 1RM squat = 150kg

Current 1RM bench = 80kg (this is clearly the one that needs a lot of work)

I always figured I just had a weak upper body, in comparison to my lower body anyway......but after delving a little deeper I have visited a Chiro (Does Strongman himself) and had X-Rays taken, I will try attach the X-ray's.

Basically it turns out that I was born with a short leg (8mm shorter on my right than my left), apparently this is fairly common I am led to believe, so now all my right shoes have an 8mm heel.

What this has caused is pretty evident in the picture attached and that combined with a poor posture has made my shoulders very weak and therefore overhead press, bench etc. hasn't progressed as it should or I would have hoped. I am currently seeing the Chiro twice a week and doing rehab everyday hoping to get things sorted as quickly as possible but these things take time.

My goals I am hoping to achieve by the end of 2015 are as follows:

Weight = 85kg max.

1RM deadlift = 230kg

1RM squat = 175kg

1RM bench = 100kg

Total = 500kg minimum.

What are peoples opinions on those goals? too ambitious? too easy?

Love to hear peoples thoughts/opinions.......

post-16187-0-54675100-1424149887_thumb.jpg

Edited by mr_rbman
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/
Share on other sites

But meh to goals...goals limit potential

Just aim to get stronger and stronger all the time and put in 100%

You may not reach goals if you don't have any, but you'll know you're as strong as you could have been

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7481838
Share on other sites

Leesh, planning on using a programme that focusses around the three lifts.

Squats one day a week with supporting exercises.

Bench one day a week with supporting exercises.

Deadlift one day a week with supporting exercises.

Strongman session one day a week.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7482185
Share on other sites

Bench wise , bugger it off the program for a while and focus on shoulder girdle strength and thorasic mobility. Happens to lots of people doing the usual gym-bro training. Short legs , long legs or no legs its not posture.

You have weak external rotation and imbalance with the stronger internal rotation muscles. So not stable enough in the lift when you press. Makes you weak.

Likely if you have a degenerative injury to your rotator cuff, pretty common. You will almost never feel pain there as it gets refered(front of shoulder even wrists) Also, injury will degeneratively progresses without pain till you bugger it right up. To see if you have a problem, stand against a wall and rest a tennis ball between the wall and your back(shoulder blades). Lean against the ball , roll it around the should blades and see if you have any tender spots. If you do then you can roll the trigger points, probably want to stop anything that involves internal rotation for a while. There are conditioning movements you can do.

Train the shoulders up and bench will be no drama to progress.

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7482737
Share on other sites

  • 1 month later...

23/3/15

Deadlift

6x8 @ 70kg

5x8 @ 80kg

4x8 @ 90kg

3x8 @ 100kg

3x10 @ 110kg

farmers walks

x20, 20m walks 50kg a hand with 30 sec rest

5m rope climb

6 with 30 sec rest

tyre flip ~200kg

3x10

Edited by mr_rbman
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7503930
Share on other sites

25/3/15

squat

6x8 @ 50kg

5x8 @ 60kg

4x8 @ 70kg

3x8 @ 80kg

3x10 @90kg

overhead press (from behind head working on opening up the shoulders/rib cage...

1x20 @15kg

1x15 @ 20kg

1x12 @ 22.5kg

1x10 @ 25kg

1x8 @ 27.5kg

1x6 @ 30kg

1x4 @ 32.5kg

1x2 @ 35kg

1x2 @ 37.5kg

1x2 @ 40kg

chinups

3x10 @ bodyweight

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7503934
Share on other sites

31/3/15

Front Squat

5 @ 70kg

3 @ 90kg

2 @ 110kg

1 @ 115kg

1 @ 120kg (PB)

yoke

x12, 20m walk @ 90kg

x5, 20m walk @ 140kg

x4, 20m walk @ 170kg

x3, 20m walk @ 190kg

x2, 20m walk @ 210kg

x1, 20m walk @ 230kg

farmers walks

x6, 20m walk @ 45kg a hand

x4, 20m walk @ 65kg a hand

x2, 20m walk @ 85kg a hand

overhead press (from behind head) wide grip

1x20 @ 15kg

1x15 @ 20kg

1x10 @ 30kg

1x8 @ 35kg

1x6 @ 37.5kg

1x4 @ 40kg

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7507100
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...