Jump to content
SAU Community

Evo 8 Build - What To Expect

simonvangruber
 Share

Recommended Posts

simonvangruber Rookie

simonvangruber

Posted
Posted

Hello Forum Members,

Just built the motor on my EVO 8 with Nitto and GSC components. The motor is able to handle 35 psi.

I also plan to run a BBK Full on 98 and E85 on dual maps.Anyone running a similar setup? If so what power and quarter mile time can I expect from 98 and E85?

Would a Precision 6262 be suitable for street driving instead of a BBK Full?

Posted the same question on jdmstyletuning forum. However, no input has been provided.

Cheers,

Simon

Simon

Link to comment
https://www.sau.com.au/forums/topic/454001-evo-8-build-what-to-expect/
Share on other sites
Mick_o Grand Master

Mick_o

Posted
Posted

What compression ratio is your motor Simon?

A BBK full will go around 300+kw and make 25psi around 3800rpm depending on setup. Id say no to a 6262 being street friendly in a 2L street car its way too big. At 300kw you should be into the late 11 Zone if ya know how to pedal good :)

scotty nm35 Grand Master

scotty nm35

Posted
Posted

My 7 is at 300kw on the stock turbo ;) (Highflowed by Hypergear. Shh.) Stock cooler, airbox, piping etc.

No need for big gawdy turbos that will cop you a defect the minute the bonnet is raised, get on ethanol and enjoy the power it unleashes with a stock looking engine bay.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...