Jump to content
SAU Community

Recommended Posts

So I just fitted a di fillippo 2.5inch twin system to a VU SS ute with ls1, everything else is stock..

The problem is its droning pretty bad on idle and upto 1500rpm, after that its very quiet but with a nice V8 sound coming thru, so I'm after any advice

on what to do with it. I just want a throaty, rumble without a drone , it sounds like an RB30 with no mufflers.

I've called the manufacturer and supplier, both say they've never heard of the system droning, so suggest it must be vibration of the body or touching something, well seems pretty good to me , i think its the rear resonator that maybe isn't doing much?

I have a few things in mind

1) replace rear resonator with a quality muffler like magna flow

2) see if an exhaust shop can make up a J pipe

3) add some 100cell cats and 2.5inch pipe from the manifold back,

4) the tail pipes are well over a foot long, should they be shorter?

Ive read all the commodore forums and nothing mentioned about this system except its the best etc...

Link to comment
https://www.sau.com.au/forums/topic/454175-ls1-exhaust-systems/
Share on other sites

When I bought mine it had an xforce system with 2 hotdogs at the back. Too loud especially at cruise Rpms.

Since putting in the cam (232 at 50) it was unbearable. Ended up squeezing 2 of these in at the back, not much room in a sedan, not sure if ute has more or less.

I welded the 2 mufflers together as they have to touch each other to fit. Massive reduction in volume

http://pages.ebay.com/link/?nav=item.view&id=171273988910&alt=web

Besides the cam high flow cats will make a big difference to the sound. It sounds like your system is a cat back only, correct?

I had full Di Fillippo 2.5inch twin system including headers and cats in my V2 Monaro and it sounded brilliant, much better than my R34 ;)

This was with a bigger cam and ported heads too so hard to say how much those contributed to the note...

EDIT: Also -> www.ls1.com.au

Edited by V28VX37

Its very confusing reading all the commodore forums, they all say this system is the best, so ive spent $800 thinking that it would sound nice and meaty, it does on the youtube clips,

the local supplier and the main business in Melbourne both say its very unusual and unheard of that the system would drone..

Ive had several opinions, probably all biased because they are business's that want some $$ spent at there shop.. they all agree that adding extractors and cats will make it worse and seem to think that the system is a rebranded redback system and just shit, the company says that's not possible as they only supply the "di fillippo" label to be welded to there system and cant be just bought and rebranded....

Ok so , latest word from the company is, " We have a VU ute here with same system and no drone or issue's, but first run the exhaust for 1000km's to "bed it in" and then let us know and we'll try to fix it".

so do you guys think, will this exhaust stop droning once it has done 1000km's?????

post-70965-0-65315600-1424867196_thumb.jpg

post-70965-0-32880300-1424867238_thumb.jpg

post-70965-0-59326900-1424867263_thumb.jpg

post-70965-0-54991100-1424867291_thumb.jpg

Edited by AngryRB

Once the packing in the mufflers bed in it will sound different, but not that different. Doubt it will happen in 1000k either.

Lol @ their response of never hearing one drone and blame fitment. So their exhausts have fitment issues?

Take a video and send it to them.

Ben- that looks like a good idea,

what did it sound like with them on the back? I still want the V8 rumble etc just not the drone, at the moment Its all engine above 2500rpm, which is almost silent.

Edited by AngryRB

Stegea97- at first it wouldn't fit up, but then I loosened the bolts on the cat pipes and manifold to cat pipes and it seems to bold up ok, but it does seem to hang quiet low at the rear, could do with being tucked up as theres almost a foot clearance above the rear resonator, as seen in pics.

I'm talking about the rear muffler, replacing that with two. Hooker aero chamber mufflers are sweet but wouldn't fit at the rear, and are slightly tricky to fit in the center of a commodore, as you really need offset in and out. And more expensive.

I'm surprised to see the exhaust uses slip joints at the back, that's a bit crusty. A proper bolted flanged connection like factory (and xforce ) is heaps nicer.

Do these engines need such large exhausts? a single 3inch on a skyline is enough for over 300kw's, the plan was to get the cat pipes and cats done next and then OTR plus tune and be happy with whatever that puts out, maybe 220-240kw's..

I have a single 3inch X force muffler that sounded good on the skyline, seeing as the rear muffler is so far back from the engine, would this work without

suffocating the flow?

Edited by AngryRB

what is 'best' is mainly subjective, as is perception of drone. I have a twin 3" Xforce on mine with 100cpi cats, 4 into 1 extractors and a H type merge. Sounds good, but at 100km/h on a slight incline in 6th it will drone. I'm not worried because I generally turn the music up louder. Sounds great otherwise, and not insanely loud unless you stand on it.

You don't lose anything down low with bigger pipes, but you will gain a little bit up the top and it gives the LS a deeper note.

I wouldn't be f**king with a DF exhaust unless you already had cats and extractors and it still sounded crap. Bear in mind that you'll want a tune after that point.

Whatever you do' don't drop the rear resonator, it'll make it drone terribly. Remove centre mufflers if you intend on removing anything.

I also used to run no cat and a straight pipe on my Skyline though haha.

Oh and Commodore forums are pretty ordinary for the most part. Grumpy old men on LS1.com.au and mang machine warriors on JC.

Edited by bozodos
  • Like 1

hmm, just took off the resonator off the rear, and Fark!!!! thing sounds like a V8 for the first time,

been told by local exhaust shop that its illegal and if i weld straight pipes to the back it will drone big time. arrgggghhhh!!! :domokun:

Question- If a 3inch exhaust can make 300rwkw's on Skyline, can an Ls1 make the same 300rwkws? if not how much?

Question- How would a Jap muffler, eg. HKS hi power silent with silencer sound on a LS1? same same or epic fail haha

Take into consideration that 250kw's is the target max power and just after a decent sound with no drone.....

Edited by AngryRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...