Jump to content
SAU Community

M35 Stagea Missing

GT-5732

By GT-5732,
in Four Door Family & Wagoneers

 Share

Recommended Posts

GT-5732 Rising Star

GT-5732

Posted
Posted

Hi All,

I have read up about similar issues on the forum but still unable to locate my problem.

My stag has a miss at idle and in high rev range but not too bad though the middle I have changed coils and the car comes good for a day then back to missing again. Plugs are only 1000km old gaped to .8, new AFM. I have pulled the plugs out and the drivers side look really good but the passenger side look a bit black compared to the drivers side.

Please help, any ideas?

Link to comment
https://www.sau.com.au/forums/topic/454380-m35-stagea-missing/
Share on other sites
GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

ok checks hoses, all look and feel ok.

I started unplugging coild packs 1 by 1, passenger side no change when removing drivers side as soon as i unplug 1 the car runs ruff.

Its only running on the 3 drivers side cylinders??? WTF??

anyone heard of this?

GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

Also, check for error codes. Could be Cam pos sensor on left bank if there are no related mods like ecu piggyback, coil packs, etc.

Which plugs did you put in?

I used NGK Iridiums LFR6AIX-11 but gapped down to .8

I have checked for codes but there is nothing there...

It feels like a timing issue to me...I have swapped out the rear sensor on the left bank.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I used NGK Iridiums LFR6AIX-11 but gapped down to .8

I have checked for codes but there is nothing there...

It feels like a timing issue to me...I have swapped out the rear sensor on the left bank.

Good chance you damaged the plugs, they are too fine and brittle to gap down if you have done so.

I use LFR7aix, but a stock M35 should be fine running the hotter 6's. The plugs I use though are already gapped at .8mm, and I run mine up to 40psi without a problem on the original 14 year old coils.

Any sensor issues will be quickly picked up by the ecu and a fault light will be displayed. What the ecu doesn't know is if you plugged the coilpacks in the wrong order for example. It's very easy to mix the front plugs up, try swapping them around.

GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

Good chance you damaged the plugs, they are too fine and brittle to gap down if you have done so.

I use LFR7aix, but a stock M35 should be fine running the hotter 6's. The plugs I use though are already gapped at .8mm, and I run mine up to 40psi without a problem on the original 14 year old coils.

Any sensor issues will be quickly picked up by the ecu and a fault light will be displayed. What the ecu doesn't know is if you plugged the coilpacks in the wrong order for example. It's very easy to mix the front plugs up, try swapping them around.

Cheers Scotty I will give it a go

GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

Good chance you damaged the plugs, they are too fine and brittle to gap down if you have done so.

I use LFR7aix, but a stock M35 should be fine running the hotter 6's. The plugs I use though are already gapped at .8mm, and I run mine up to 40psi without a problem on the original 14 year old coils.

Any sensor issues will be quickly picked up by the ecu and a fault light will be displayed. What the ecu doesn't know is if you plugged the coilpacks in the wrong order for example. It's very easy to mix the front plugs up, try swapping them around.

Ok swapped out the plugs to the old ones (LFR6aix-p) no change, the front 2 coil plugs can't get swapped on mine as there isn't enough length in the plug wire..... ?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

On the passenger side? The rear two can be mixed up then yeh? It's the coils where the plugs sit back to back you need to worry about, I have seen them mixed up many times, sometimes it's even my fault. :P

  • Like 2
GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

checked again Scotty, but I was able to get any mixed up with my Stagea as the length of each plug will only go to 1 spot. I did change 3 of the spark plugs back to the old one and it seemed to make a bit of difference to the mid and top end, i will change out the other 3 this weekend coming as I don't have the car with me. I'm also replacing the PCV valve too see if that make any difference to the idle.

I have been also thinking of do an injector clean, good idea??? I'm thinking it cant hurt to do it....

If anyone else has any ideas, they would be greatly appreciated.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I can send you a refurbished set of injectors if you like, but that probably won't be the issue. You can most definitely mix up two of the plugs on each side, the ones that face each other where the plugs are nearly touching. Try it out before anything else...

GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

I swapped over the plugs but it only just reached....you can see in the pic the front and middle are different lengths, the drivers side could get mixed up.

I'm really starting to lean towards injectors

Scotty if can pm me about the injectors you have, that would be great, unless any other ideas

post-39528-0-97955900-1426488980_thumb.jpg

GT-5732 Rising Star

GT-5732

Posted
  • Author
Posted

ok yep, i swapped them around, no good.

i pulled the injectors, all good nice and clean, flowing nice.

i was having a listen to the exhaust and i think there might be something loose there and when the turbo comes on i can hear a different noise i havent heard before, im also using more fuel then usual, im going to have a look into the exhaust this weekend coming. could be a blocked exhaust all along.....

i love solving problems but i hope i can solve this soon cause its really giving me the shits!!! lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • R0yalT
      R34 GTR Vspec Garage Sale - All must go!

      By R0yalT · Posted

      Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • Duncan
      A Boy's Love For His Rb20

      By Duncan · Posted

      sensible choice....and all 32s should be in yellow
    • Dose Pipe Sutututu
      Borg Warner EFR Series Turbo's V 2.0

      By Dose Pipe Sutututu · Posted

      Run it in open loop for now, and drop the frequency down. This lowers the resolution and requires more duty cycle to do anything, however good to troubleshoot.
    • MBS206
      Borg Warner EFR Series Turbo's V 2.0

      By MBS206 · Posted

      According to Josh, one of our local Americans, it seems the USA still can't get turbo systems quite right at a lot of places, so possible that they're not running great at all, but they've just not complained as NFI about getting it right...
×
×
  • Create New...