Jump to content
SAU Community

Recommended Posts

Hi gents,

I got problem that my car often will shudder when i speed up to 110km/h and continue shudder if I acc to higher speed. I can feel the vibration from the seat, not from the steering wheel, i think it is rear wheel problem?

currently my car has 4 brand new rotors, 4 brand new rims with balanced and 4 good tyres (about 10000km).

anyone has idea or experience on this? :unsure:

Link to comment
https://www.sau.com.au/forums/topic/454705-often-shudder-at-110kmh/
Share on other sites

I would be looking at tailshaft and centre bearing also disc rotors nd CV joints.

I actually I asked do full underneath check by my mechanic and he noticed me some problem:

1. front inner rear control arms minor tear

2. rear lower shock bush's minor cracks

3. rear upper inner middle diff bush failed and leaking

I am not sure it the shudder relates to above problem

Yeah and radius bushes

I actually I asked do full underneath check by my mechanic and he noticed me some problem:

1. front inner rear control arms minor tear

2. rear lower shock bush's minor cracks

3. rear upper inner middle diff bush failed and leaking

I am not sure it the shudder relates to above problem

I would be looking at tailshaft and centre bearing also disc rotors nd CV joints.

yeah, I read some threads here and get some points:

tailshaft

tailshaft centre bearing

uni CV joints

actually i have set of brand new disc rotors.

Aftermarket Rims not centered on the Hubs or Water in the Tyres or a Bubble in a Tyre.

I have 4 hubs adapter rings and there is no water in the tyres. i already switch the tyres between front and rear. let me see if the problem still here or not

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...