Jump to content
SAU Community

Recommended Posts

Hmmm applying a sealant over a wax is the exact opposite of what you are meant to do.....

With stacking, you always put the most durable product as your base and least durable as your top. Sealants also require a squeaky clean surface to bond to, this is why you are meant to always do an IPA wipe down of the surface before applying. So having a sealant try to bond to a Carnauba, Montan or Beeswax based wax normally doesn't go to well.

I personally haven't played with the Zaino stuff (but I am aware of their range) and the ZCS is meant to be the same as what Nanolex Spray Sealant is which I have plenty of experience in.

Very strange...

To get technical Modesta is a coating, not a sealant :)

Modesta is the same patented Japanese technology as what we do under the Gyeon range. Extremely good stuff that lasts for years.

This is my write up on the Gyeon Mohs + system but basically applies the same to Modesta BC-03 :) I've been thinking of offering Modesta as well just in case some people prefer one over the other.

www.attention-to-detail.com.au/what-are-gyeon-quartz-cloth-coatings

I believe so depending on what you want :)

It depends what is important to you I guess. The main benefit is the scratch resistance since that can't be reproduced with anything else. So in black cars swirl marks are always going to happen unless you are extremely careful with how you wash your car (most of the general public aren't but obviously on a car enthusiast forum like this a large majority are fussy about their car). The added hardness from the coating makes swirl marks nearly a thing of the past as long as you are a little bit smart with washing.

For a person that absolutely loves detailing cars and wants to be in the garage every few months all day long, then using high end waxes and such is fun and rewarding so a coating might not be necessary as you probably aren't getting the full benefits.

With me, I have a black 2014 Mazda 3 SP25 that my partner uses as a daily and isn't taken care of as much as it should, so for this I did a Mohs+ coating and it is fantastic for it since I know it is completely protected, easy to keep looking good and I don't need to clean it as often.

For my M3 I barely drive it and always try keeping it looking as best as I can. I like trying new products that suppliers send me and always do test panels to see how product A goes against product B. I'm extremely fussy with how I wash it and it is dark grey so for my car I like using waxes/sealants. If I didn't have the Mazda as well, I probably would have done a coating but this way I can show customers both vehicles if they want to see real world differences.

Check out her black Mazda 3 here: www.attention-to-detail.com.au/project-gallery/mazda3paintcorrection

The gloss and depth I got out of that was simply breathtaking but took my a week to do.

Either way I always recommend a coating to a customer because it is so different to waxes and sealants and is true modern day technology. Understandably the cost of $600-$800 that I charge might not be for every ones budget, but I still think it is a bargain given what it does.

  • Like 1
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...