Jump to content
SAU Community

Rear Lock / Hand Brake Or Rear Brakes In The Morning

INSANITI
 Share

Recommended Posts

INSANITI Collaborator

INSANITI

Posted
Posted

Hi All,

As soon as I got home last night I cleaned my wheels, using light soap and luke warm water. I then parked the car in the garage. This morning when I was driving it out of the garage the rear (more passenger size rear) felt like it has locked up. it doesn't feel like its the foot (hand) brake it felt like the brakes got stuck to the brake rotors. I don't put a lot of pressure on my foot brake so I doubt its that. I had to add a bit of acceleration as I reverse to force it to release. it seemed to work and I drove to work no problems.

take note that after hosing the brake rotors it gets a bit rusty looking (slight squeak as you brake)

has anyone experienced this before?

are there pads in the footbrake (handbrake) that needs replacing?

thanks

sonicii Veteran

sonicii

Posted
Posted

happens to me every time I wash my car and park it back in the car port. isn't major and doesn't require much extra effort to get the car moving, but it makes a 'cluck' sound when it lets go. I just assumed it was a bit of corrosion between the rotor and the pads from the water.

Pads in the handbrake (Foot brake) shouldn't need replacing if you don't drive with the handbrake on.

mkn23 Collaborator

mkn23

Posted
Posted

yeah i get kinda loud clunks in changing gears when it's cold, if warm the clunks sound normal and fine

my driveway is on a slight slope so maybe that's why also and i always get the clunking sound from the brakes every morning

The Max Mentor

The Max

Posted
Posted

And while we're talking about parking brakes, despite having had them professionally adjusted, I still don't have a lot of confidence in the grip of the parking brakes. I'm going to take the rears off and inspect them soon but I'm thinking it might be worth considering a better pad or at least a new set in the event they're just worn away from perhaps a careless previous owner who drove with them on for a bit now and then? :)

  • Like 1
INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

I always wondered why Nissan put a foot park brake instead of the normal hand brake.... once I drove 50 metres of it on hahaha!

Anyhow its good to have raised this I don't think this has been raised before. I was sh1ting my pants thinking it would lock up while I was driving hehehe..

sonicii Veteran

sonicii

Posted
Posted

I always wondered why Nissan put a foot park brake instead of the normal hand brake.... once I drove 50 metres of it on hahaha!

Get a 6sp manual.. it has a hand brake! :)

  • Like 1
t5iv Grand Master

t5iv

Posted
Posted

Autos have the foot brake to allow more space in the centre console and a more smooth surround. Can't have pedal park brake on a manual so that's why they have handbrakes.

Flecks of rust spots on your rotors are nothing to be worried about. Drive normally and it will wear away.

  • Like 1
INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

Get a 6sp manual.. it has a hand brake! :)

I wish I did now. I was in awe when I saw the first skyline I viewed and due to having gout problems back then I figured a semi auto is good enough and pulled the trigger on my 2005 coupe. hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...