Jump to content
SAU Community

Recommended Posts

Hey I know a lot of people will say stick with standard cams but I'm about to do the timing belt water pump and heater hose upgrade on my 32 gtr. I thought at the same time I will change my cam gears to adjustable and drop in some cams.. here is a little list of what my car has done to it;

Hks gtss turbos

Midori seibi dumps

Full exhaust

E85

1000cc injectors

Its getting 310 rwkw with standard internals

If anyone could recommend a good cam setup for this that would be great thanks

Yes they are pretty minimal.

I would spend the extra cash on something more important.

But i didn't... So that statement is void.

Type B FTW!

Type Bs are great as long as you're happy with a car that drive terribley down low for the benifit of it going wank wank wank at idle.

I thought so much of those cams I literally gave them away cause I couldn't justify taking anyone's money for them

  • Like 2

How can type bs make a gtr with gt-ss drive Terribley down low

They already responsive as f**k ! I been in my mates before and after type bs noticed no difference down low

I should find out what gains he got with cams....

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...