Jump to content
SAU Community

Recommended Posts

Results from my Rust Removal :D

Pretty happy with the turnout...it's much better than it was but I just couldn't get that bottom left corner clean... There was so much rust the initial batch of CLR just went brown and foamy, I had to clean it out and re-apply.

But, pretty happy with the results.

post-143051-0-39831600-1464924307_thumb.jpg

post-143051-0-34720400-1464924390_thumb.jpg

  • Like 4

Well it's going to be smaller, cheaper jobs like this for a while.

Contemplating clay-barring the car in an attempt to remove some of the stains from the paint. Never used clay before and I'm not sure if it'll do what I want... any advice?

Well it's going to be smaller, cheaper jobs like this for a while.

Contemplating clay-barring the car in an attempt to remove some of the stains from the paint. Never used clay before and I'm not sure if it'll do what I want... any advice?

I'm shit at all those cleaning sort of jobs I'm afraid.

I'm always worried I'll do it wrong and cause more long term harm than good i.e paint swirls, scratches etc.

  • Like 1

I personally get a very relaxing, sense of joy when cleaning my vehicles.

i'm far from a professional, but after watching Larry's videos and following his advice, I improved ten fold.

CBR RR 1000? Let's organise bike cruise [emoji28]




  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...