Jump to content
SAU Community

Recommended Posts

Oh was expecting it to be a canada thing. Looks good

Going with blokes from work?

Yeah, with the boss man.

Lachy you still doing the cross japan trip in the kei car?

It's been pushed back until 2018, who knows, I might be dead by then :P

Looks like Racewars 17 may be back on.

I shall have to pull le finger out and get the 32 done. Races Lachy??

Find me an RX8 and you're on!

  • Like 1

Find me an RX8 and you're on!

Done!! i've just emailed Nitto about some goodies. Need to get a hold of Ovaboost to sort him out with tuning it and making sure my auto combo will suit everything

  • Like 1

Morning all

Shibuya shuffle is a must Elle, especially at night. Nismo shop in yokohama, and the factory tour just down the road. Normal disney was pretty good, (carni food was amazeballs), go to the big Upgarage up near disney land, it is the better one.

If you are catching the train everywhere, head down to tokyo teleport to the toyota museum/workshop, they also have a really big shopping centre down there with a big transformer out front

Very very helpful ! Thank You so much Corey !

And Apologise for delays, very busy at work [emoji15]

Morning all

Shibuya shuffle is a must Elle, especially at night. Nismo shop in yokohama, and the factory tour just down the road. Normal disney was pretty good, (carni food was amazeballs), go to the big Upgarage up near disney land, it is the better one.

If you are catching the train everywhere, head down to tokyo teleport to the toyota museum/workshop, they also have a really big shopping centre down there with a big transformer out front

Very very helpful ! Thank You so much Corey !

And Apologise for delays, very busy at work [emoji15]

Morning all

Shibuya shuffle is a must Elle, especially at night. Nismo shop in yokohama, and the factory tour just down the road. Normal disney was pretty good, (carni food was amazeballs), go to the big Upgarage up near disney land, it is the better one.

If you are catching the train everywhere, head down to tokyo teleport to the toyota museum/workshop, they also have a really big shopping centre down there with a big transformer out front

Very very helpful ! Thank You so much Corey !

And Apologise for delays, very busy at work [emoji15]

Ok, so, I was just on my way to pick some one up at 5am, just taking it easy, wasn't doing anything stupid, car was traveling downhill on a turn, I was only doing 30ish km, the read wheels lost traction and I guess I was too slow to react, I let go of the accelerator and it just took me for a slow spin. If it wasn't for a pesky bus-stop nothing would have happened. All of the electrics still work etc...it's purely cosmetic. The dent could probably be pulled, but realistically I think i'm looking at a new door now, will have to ring around to some panel-beaters and get a quote.

not looking forward to when the Wife wakes up...

Ok, so, I was just on my way to pick some one up at 5am, just taking it easy, wasn't doing anything stupid, car was traveling downhill on a turn, I was only doing 30ish km, the read wheels lost traction and I guess I was too slow to react, I let go of the accelerator and it just took me for a slow spin. If it wasn't for a pesky bus-stop nothing would have happened. All of the electrics still work etc...it's purely cosmetic. The dent could probably be pulled, but realistically I think i'm looking at a new door now, will have to ring around to some panel-beaters and get a quote.

Thank god you're ok ! Can you not take it to smash and repair ?




  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...