Jump to content
SAU Community

Recommended Posts

On 11/4/2016 at 6:51 PM, Manne said:

Ok, I'm just gonna take my wife out to dinner.
I'll park my car in the underground car park at Vic Park Shopping Center.  If any of you show up, just text me, or post here, and i'll come pop over. 
Just look for a Silver R33 Sedan.

 

On 11/4/2016 at 8:06 PM, Manne said:

Been here 45 minutes. no one is here. heading home 

Sorry dude!

My mate who lives 5 mins away from me decided he was going to Freo too and we split an uber.

  • Like 1
Lucky you've got that donor default_wacko.png


I ordered new...

I don't feel like doing it again anytime soon. Too much had to come off and I didn't have space in the shed to strip the other one at the moment.

150 for complete shaft, I returned cv boots to reduce outlay :/ its gonna be here after lunch so I'll do some painting while I wait :/
Love doing them. Was it the passenger side that went?


Drivers,

Got it assembled, but when I pulled passenger axle to make more room I found the seal damaged.

It then suddenly became beer o'clock
Hey all, anyone else not getting notifications on app??

Yer just resubscribe n login n out. I've always been getting problem i just learned to deal with it but also made me less addictived to SAU. [emoji26]
Hope it helps.

Need a seal still. Have just finished painting the boys rooms, prepping the theatre room for paint now.

I'm going to reassemble the axles half in there so I don't need to remove more stuff. It should go smoothly once seal turns up. Bunbury bearings have nil stock so I need to order in




  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...