Jump to content
SAU Community

Recommended Posts

Elle to fix the control arms any cheaper you might have to go aftermarket.

Its actually a pretty old dodgy trick from manufacturers for aaaages. Even Ford did a similar thing, by cold riveting the lower ball joints to the arms, then only listing a part number for the complete lower arm - not just the ball joint.

Price about 10 years ago was $600+ per side for the arm from ford

 

or $35 for a ball joint, complete with bolts to replace the rivets...

  • Like 3
36 minutes ago, Stinky Rooster said:

Elle to fix the control arms any cheaper you might have to go aftermarket.

Its actually a pretty old dodgy trick from manufacturers for aaaages. Even Ford did a similar thing, by cold riveting the lower ball joints to the arms, then only listing a part number for the complete lower arm - not just the ball joint.

Price about 10 years ago was $600+ per side for the arm from ford

 

or $35 for a ball joint, complete with bolts to replace the rivets...

Same thing with bmws..... lol

  • Like 2
Elle to fix the control arms any cheaper you might have to go aftermarket.
Its actually a pretty old dodgy trick from manufacturers for aaaages. Even Ford did a similar thing, by cold riveting the lower ball joints to the arms, then only listing a part number for the complete lower arm - not just the ball joint.
Price about 10 years ago was $600+ per side for the arm from ford
 
or $35 for a ball joint, complete with bolts to replace the rivets...
Here comes the rooster. I reckon dale is on the money.
  • Like 1


You think alike with dave , he said that before but guess the qualified mechanics should knows better lol no offense! [emoji23]
Yep I agree wouldn't touch your beast with a barge pole. Trolley jack scissor jacks and ramps in my car port. Would look hilarious;-)
  • Like 1
Elle to fix the control arms any cheaper you might have to go aftermarket.

Its actually a pretty old dodgy trick from manufacturers for aaaages. Even Ford did a similar thing, by cold riveting the lower ball joints to the arms, then only listing a part number for the complete lower arm - not just the ball joint.

Price about 10 years ago was $600+ per side for the arm from ford

 

or $35 for a ball joint, complete with bolts to replace the rivets...

 

Don’t get me wrong , I won’t be happy to spend $1700 for the bushes but Nissan’s has design it specifically and I doubt after market bushes would fit in nicely ?

 

There maybe other way round it I don’t know ? Bushes are made from rubber, Nolathane , urethane or softer metal alloy and these bushes may been inserted during the manufacture of the control arm and not slip in and out of the assembly.

 

 

So either $1700 or pay for 2nd hand on eBay

 
Don’t get me wrong , I won’t be happy to spend $1700 for the bushes but Nissan’s has design it specifically and I doubt after market bushes would fit in nicely ?
 
There maybe other way round it I don’t know ? Bushes are made from rubber, Nolathane , urethane or softer metal alloy and these bushes may been inserted during the manufacture of the control arm and not slip in and out of the assembly.
 
 
So either $1700 or pay for 2nd hand on eBay


Wait for Hanky to get back then sort it out with him it doesn’t sound super urgent
  • Like 2

Ill see if she can Tuesday when I have a day off. She might need a hand with questions as Sanae has no idea about cars.

I’d go aftermarket personally, but not the cheap cheap stuff. It’s not like you track the car and punish it through corners. Some aftermarket is as good as genuine and for the price I’d be a tight ass

Ill see if she can Tuesday when I have a day off. She might need a hand with questions as Sanae has no idea about cars.

I’d go aftermarket personally, but not the cheap cheap stuff. It’s not like you track the car and punish it through corners. Some aftermarket is as good as genuine and for the price I’d be a tight ass



If you can recommend any good aftermarket not cheap cheap stuff then , that would be great , any helps would be good :)

And Apparently I need to be a bit more aggressive with the car [emoji594]- hence one of the reasons it’s clunking.

Nite boys and thank you !
  • Like 1
Wow 1700bucks for stock pay the same n get fully adjustable made by high end after market company TOP SECRET.

https://www.nengun.com/top-secret/front-upper-arm-for-r35



Nice ! Thanks Mark , ill have a read and wait for Lochy :)



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...