Jump to content
SAU Community

Recommended Posts

11 hours ago, t_revz said:

 


Driving through cockburn always makes me Wellard

 

Thats even better than..."I would rather be Upper Swan than Innaloo"

On 7/17/2018 at 8:37 PM, pol1on1 said:

Yer oil dipstick popped out too much pressure in crankcase.
Not sure to why i had so much pressure to do that. But to fix the problem and do happy track dayz i think i need a catch can, larger sump, baffle kit for sump n cam cover, oil restrictor Maybe even a oil accumulator on top.
Then it might hit the track again but for now ill keep it straight drag pass.

Did loose about 4ltrs of oil from 6 hardly touching the dipstick that how known something went wrong as i was going up the shecane at 6k to 8k rpm i look down n noticed oil pressure at 2kgcm2..... at that point my car seat had me by the balls.
No knocking but at idle in gear lift the clutch put load on engine makes a small squeaking sound n crank pully has very slight movement . So thrust bearing has worn too much. :(

Sure it hasnt cracked a piston and uv had excessive blow by?

I bloody hope not but i think i might put a borescope on my to do list.

As for me day dreaming of a rebuild stroker kit money can buy a 2.8 or get a rb30 and same money buys a 3.2 or 3.4 [emoji57]
Now my biggest problem is finding time to wipe my own ass.
Got another baby 11mths apart
Happy dayz happy dayz [emoji6]

Mine cracked 4 ring lands and was not visible from above and spark plugs looked normal. The one piston that cracked from rings touching would barely be visible from above but the spark plug always looked oily

  • Like 1
I bloody hope not but i think i might put a borescope on my to do list.

As for me day dreaming of a rebuild stroker kit money can buy a 2.8 or get a rb30 and same money buys a 3.2 or 3.4 [emoji57]
Now my biggest problem is finding time to wipe my own ass.
Got another baby 11mths apart
Happy dayz happy dayz [emoji6]


30 is not same money. So much small shit has to be changed for the extra height you never think about. As someone who has done it, the torque is awesome, the initial install is far more involved than just bolting it in and Then you have the rego issues.

The 2.8 is less of a headache, it's still a 26 as far as rego care and everything that unbolted just bolts back up. If you have the time/money and want the 3.2/3.4 then yes, it's awesome but don't expect it to be as quick to do or the same cost.
  • Like 1
35 minutes ago, Hank Scorpio said:

Man, I was smashed after yesterday. It was loooooong!

I am hearing that!

After you left yesterday, we got stuck into the cake, and before we knew it, finished the glaze just before 11pm

The dog still hadn't moved as of 6.30am this morning.





3.2/3.4 then yes, it's awesome but don't expect it to be as quick to do or the same cost.


Yeah i was only thinking of the stroker kit only.
Isn't the height change the only problem was thinking that hypertune now make a low profile rocker covers.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...