Jump to content
SAU Community

Recommended Posts

Hi guys new to SAU, Just signed up.

I'm looking to buy a skyline and I've been looking at one which is immaculate, It's owned by my mate, Has just had a fresh Respray, It's completely 100% stock apart from an immobiliser and alarm system on remote, The readout says 40,xxx kms but I'm not sure if I should trust them or not?

Engine looks to be in good condition aswell, Has been compression tested, He's recently rebuilt the head aswell as general maintainence, Replacement of fluids, ect.

Now I'm looking to have this as a daily driver, I've tried searching for this topic and have found information but it's all mixed opinions.

What are your thoughts on an R32 GTR in terms of daily driving and reliability? All I've managed to read about is some people saying you'll need to rebuild the whole engine which is big $$ and others saying it'll be fine?

I'm not looking to do any serious modifications at the time being so it will be left stock.

Could someone please elaborate on the issues that they may experience ect? I'm new to jap cars especially skylines, I'm a mechanic by trade but still not sure on the 26's.

Thanks guys ✌?️

Link to comment
https://www.sau.com.au/forums/topic/456637-buying-an-r32-gtr-help/
Share on other sites

Get the underside of the car checked for any worn bearings/bushes and potential rust issues that the car may have. If it has plenty of those that you can't see just by going around the car then you could be up for some work.

Also the 40,000km is likely to be BS, most likely closer to 150,000km or more, so if you really wanted to know the true value before it was imported you can do the Japanese History/Rego check thing and you can get the Auction Documents for a small fee. You'd be able to guess with certain things on the car aging the difference between "40,000" and the unknown true value.

Secondly if you are daily driving and the engine is in good condition, verified by a compression test, then needing to rebuild the whole engine is a load of shit, it's like driving another car, except if things break or you want to do things it will cost you a fortune compared to other dailies.

If the car is in good condition and you purchase it and it's fairly stock, daily driving shouldn't be an issue. Just make sure you keep up regular maintenance intervals and check over the car frequently to make sure it's all running well. Quite easy to do a fair amount of things on the RB yourself just read up if you are unsure.

I Daily drive a 33 gtr currently and the car is reliable just like any other car with maintenance, but when you start wanting to modify it you have to take it off the road and need some other form of transport until its ready again. My car sits fairly low and I have some problems getting up driveways and jacking up the car requires 3 stages.

If your a mechanic just look at issues other 25 year old cars have. Heater hoses, clutch, leaks, etc.

And then look how annoying it is to repair that on an rb26.

Gho5t daily drives a 32 gtr and will likely add his input soon.

I daily'd my GT-R for a year and a bit, get ready to pay for petrol (avg. 14L/100km).

Apart from that, if suspension is relatively standard, it's fine. I have a heavy arsed clutch and stiffer suspension, bigger wheels/low profile tyres and some suspension bits changed.

But Sydney's shitty roads and traffic will leave you shitty after the drive.

Reliability wise, they're fine. No different to any other turbo car (maintain it properly and it'll be fine).

My car has ~150,000 import km, AFAIK unopened engine and standard turbos/boost/ECU/etc.

Yeah most work I'd be doing myself to be honest, As long as it's nothing major.

My mates got all the paperwork and import papers ect for it, What's this Japanese rego thing? If anyone has a link that would be great.

Sounds like it should be fine as a daily, I'm use to rough roads and I'm sure I'll get over the traffic, I'll keep up maintainence obviously and won't be modifying it for a while, I want to keep it stock until I get a really good feel of the car,

Spending 3 hours in traffic everyday was shithouse, so glad I train it to work now.

Drive around normally and it's no different to any other AWD turbo car. It's when you start shoving more air and thrashing the crap out of it you'll run into trouble, like any other car.

He's a good mate of mine, He's had a full Respray done with rust cut out of the wheel arch, quarter panels and rear window sill.

Head was rebuilt as he noticed a hint of oil in the radiator and as a precaution did the head gasket, didn't seem to be the issue but the Problem seemed to stop after that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...