Jump to content
SAU Community

Recommended Posts

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

You can use that as a guide on how to decode the plate and what each letter means. For that plate I have no idea what the last 3 letters mean. But seems like a Standard GTR that's imported.

If it was ADM or Nismo, etc you'd notice the letters would have a certain combination, etc.

BNR32002355 would indicate an early run from 1989. These are in demand in USA now.

Model# alphanumeric indicates what it came out of the factory with.

See if "Iron Chef Imports" might export it for you to the State, depending on its condition. In the USA he's known as Iron Block imports

You should have an import plate also as Terry said in addition to the build plate. Once a car is registered in Australia for the first time though the import plate doesn't have to be displayed either after that.

If in doubt you can always check the VIN number on Nissan Fast or something to confirm the status of the car.

Once the car is registered it will have all the compliance details attached to it as it's required.

Edited by breaker1845

lol the fact that he would have payed plenty for an aust delivered, if he didnt pay through the nose and some how ended up with one and never realized it... he would have won at life.

i have however wandered how much my 89gtr would be worth in the USofA this year....... just y'know.. wondered :)

It's gun metal grey so it's an import

Aussie ones only came in red, silver and black. Apart from a couple that were used as pace cars that momo did a few things to and they were green

Also if it was brought in under the 15 year rule (before it was changed) it won't have an Australian compliance plate

There is a thread for getting VIN's fasted you can post in if you don't mind waiting a day or so to get the results back.

Ghost posted the link earlier, just go to the last page and add the VIN you want fasted I guess. Should provide most of the details.

If the car is currently registered in a state you can also go to the state government website and do a quick check with the VIN for details regarding compliance and security for free or a small fee usually.

Edited by breaker1845

almost no need to fast bud. we practically share vins.

post-60068-0-78905100-1432083207.jpg
20150201_173054_zpswudvduj6.jpg

K: Coupe

B: 2.6L (GTR)

N: Super Hicas + Attessa

R32: 8th Generation Skyline
R: 2 Doors

X: GTR (16 Inch Wheels)

F: 5 Speed Manual
S: Intercooler + Turbo + EGI
L: Fog Lights

then it gets choppy...

mzg

GH05T, on 03 Feb 2015 - 09:51 AM, said:snapback.png

ok more research shows allot of conflicting info

M: Limited slip diff/ rear wiper less (which i have) ???

Z: Cold weather pack/ early n1 spec ???

G: still nothing

GH05T, on 03 Feb 2015 - 10:41 AM, said:snapback.png

so more info suggests the following

M = P+Q (Climate control + upgraded sound)

Z = Cold pack? heated side rear view mirrors

G = B+D (ABS + Visc LSD)

still unsure as M states elsewhere about the wiperless windscreen which i do have.


never found out for sure.
.... but yours has a rear wiper, mine did not. otherwise almost identical base cars.

Edited by GH05T
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...