Jump to content
SAU Community

Recommended Posts

Yes i do. Lol. But i also have lots of cars. This is for my gts4 that i just brought back from the dead. Im running small 550 injectors and using a power fc. I know to make about 500hp using no dyno, but on my other gtrs im aiming for way more than 500hp. But on this car (gts4) i just was wondering if i need to use z32 afm for 22 psi. Thats my goal. Ive done 25 psi on rb25 wit z32 afm and the motor still going to this day. Just need to know if the twin stock r32 afm will handle 22 psi.

post-37293-14335469666703_thumb.jpg

Max psi? 10000000000

Air FLOW meters measure flow not pressure. They can read 'x' amount of flow. Need to know what turbos are being used

This is why AFM's are usually talked about in terms of how much power they will handle as air flow is pretty much directly proportional to power. The more air you get in the engine, the more power you can achieve etc etc

Edited by 89CAL

The motor is freshly built. All stock other than oil mods and acl race bearings, mls head gasket. I did it all with spare parts around the yard. Doesnt mean i just want to just blow it up. Lol. I will tho. Kml. Im sure ill figure it all out tho mate. Worst case is ill just run twin z32. But was wondering as i have like 12 oem afm for gtr's. Oh internal parts are all new. Not old. :D

post-37293-14335485889308_thumb.jpg

The motor is freshly built. All stock other than oil mods and acl race bearings, mls head gasket. I did it all with spare parts around the yard. Doesnt mean i just want to just blow it up. Lol. I will tho. Kml. Im sure ill figure it all out tho mate. Worst case is ill just run twin z32. But was wondering as i have like 12 oem afm for gtr's. Oh internal parts are all new. Not old. :D

Courtesy Paulr33's website:

Rule of thumb for Air Flow meters RWKW (you will note a single RB25 AFM will measure more than a single GTR AFM)

AFM Max Power at 5v Single RB25 AFM 225rwkw

Single Z32 AFM 350rwkw

Single Q45 AFM 300rwkw

Twin RB26 AFMs 300rwkw

Twin RB25 AFMs 450rwkw

Twin Z32 AFMs 511rwkw

Twin Q45 AFMs 600rwkw

Thanks for that mate. These are in rwkw. Simple conversation. Looks like twin r32 afm will max out but could work, but at there limit. Hmmm. Funny to see that a singal z32 is at 350 figure twin would be at 700 but its at 511 in twin set up. And twin q45 is at 600. Is this wright????

twin rb25 is great for resolution.

twin z32 are generally over kill (unless needed) and in many setups you end up using only 1/2 to 3/4 of the scale and lose tune resolution.

i would much rather the AFM scale be @ 90% max than at 50% max

I started to look at the flow charts for the holset and a gtx35r. Looks like there will be about 15 to 20 LB/Minute difference from about 22 psi.

Im trying to compare it to my r33 gtr thats running twin z32 afm with gtx3582r turbo.

Damn i wish i had a better turbo laying around. :(

post-37293-14335879561466_thumb.jpg

post-37293-14335879699759_thumb.jpg

Yeah there is actually.

Series one is a 4 pin while series 2 is a 3 pin pink label.

I think Nistune has it listed for an extra 20 HP or so

So the R33GTST S2 has the pink label, and the S1 has the green label, which is also used by the RB20DET and RB25De, just for clarity.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...