Jump to content
SAU Community

R32 Gtst Cut Outs

Lockie94
 Share

Recommended Posts

Lockie94 Rookie

Lockie94

Posted
Posted

Hey guys just wondering if anyone would know why my r32 gtst cuts out,

I was at a set of lights stopped and my car just cut out completely, didn't stall didn't or run out of fuel it just turned off kicked it back over and it stRted fine,

I have a feeling it doesn't idle right either, cold it revs at 1100 rpm or higher which I know would be normal but warm somewhere in between 850-1050 always changing and not holding a firm idle always changing if you understand what I mean or is this a comman 32 thing?

Link to comment
https://www.sau.com.au/forums/topic/457270-r32-gtst-cut-outs/
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

AAC Valve, AFM, TPS could be any or a combo

Search for cleaning AAC, Clean the AFM with contact cleaner and if still suffering have the TPS checked and adjusted.

I'm not sure how long you have had it but a good thorough service never goes astray either

Plugs, filters, fluids, brakes

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...