Jump to content
SAU Community

Recommended Posts

This car does not have stock wheels.

The grill has a GTR badge.

The front bar is not an original standard

front bar.

Just curious what color is the car you

are talking about.

Assumption is the mother of many mistakes.

Your reply is a bit smug please feel free

to PM me with any constuctive comments if

u know this car so I can avoid making a

mistake.

Richard

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

Are you sure the white smoke just wasn't steam coming from the cold exhaust in cold weather? Water condensation evaporates when the exhaust heats up and steam rises, that old trick? Maybe the guy wasn't talking out his ass because they would be more likely to do this when washed/rained on.

If it was "wafting vertically" and "diffuse and light" then it could be steam. Next time you start it from cold, watch the exhaust and "feel" the smoke. If it is steam it will condense on your hand and you will have a dirty wet palm.

I don't think it was steam. Although I didnt hold my hand above it to check (should have).

It did seem to go away though after a few decent revs... The engine reved out nicely. No strange sounds.

I'll let u guys know how the mech/comp test goes tommorrow. That and the REVS check are the last 2 hurdles the owner has accepted my offer.

I will loose the $600 from deposit and mech check but figure thats a small price to pay on avoiding an expensive mistake, if the mech check fails.

I will need to fix that door and the rear panel next to it though. Not a roadworthy issue but I cant stand things not straight.

Despite the fact it was probrably a little silly making a decision so quickly - I wouldn't stress too much. Chances are the car's still half decent. If it's had accident history that doesn't matter greatly either - as long as it's been repaired correctly.

Despite the fact it was probrably a little silly making a decision so quickly - I wouldn't stress too much. Chances are the car's still half decent. If it's had accident history that doesn't matter greatly either - as long as it's been repaired correctly.

Correct, but make sure the parts are correct items too.. i dont consider a fibreglass $300 copy of a bar appropriate for a gtr that should have a plastic bar that is worth $1700. And thats just an example.

If in doubt, get someone from the forum who knows more to go with you.

This sounds really sus, like its been smashed in the front end. look at the bolts fastening the front quater panels. Also look at any other bolts that fasten panels to see if they are new or are freshly painted over. Loof at the fmic mounts, pipe hose clamps etc. Have a look down the side of the car to see for straightness. check the hose clamps and fastners etc on the engine too for replaced parts. Be very very careful mate! good luck, hope you can find a good GT-R! :)

-rb25

N/A you would do me a great service by PM ing me

all details so I can work out if it is indeed the very

same car.

You continue to leave clues and abstract comments

without helping someone out.

Is this too much to ask, or are there other issues

at play here?

If PM is no good feel free to email

[email protected]

If u are thinking that I should have enough info

to go on with you are wrong I need better

evidence so I would appreciate some help.

Thats not an unreasonable request is it?

White smoke can mean water is in the exhuast, also meaning steam.

It can also mean there could be a water leak into the engine from the water system, or water in the oil.

Get it checked out and decide after that, it shouldn't be of any great loss to you either way it goes.

I was watching some doco on National Geographic, and for the smoke that comes out of the back of those stunt planes, or the formation planes at the air shows, they said they dropped oil on the exhaust and the heat from the exhaust causes the white smoke? So don't know if that applies to a car, with an oil leak on a hot exhaust? Altho, if it happens as soon as you turn it on then goes away when it gets warm, that contradicts that idea a bit doesn't it?? Oh well :D

Good luck with the buy. I bought a car in japan a few months back, description was good and pics look ok, just hoping she's alright when it gets here. Hard to tell even when inspecting a car in person, let along not seeing the bloody thing :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
×
×
  • Create New...