Jump to content
SAU Community

Recommended Posts

Automobileblog.com has posted "Future Japanese Sports Cars: Nissan GT-R, Lexus SC, and Toyota Supra"

They have a little bit of info in the post and rough release dates;

Next GTR: Not before 2018

Lexus SX: Mid- to late 2016 as a 2017 model.

Toyota Supra: Industry rumblings vary, but the Toyota Supra likely arrives either in 2016 as a 2017 model or 2017 as a 2018 model.
I think the Supra looks seriously awesome! And, as said in the post on AMB, carries a lot of design principles from earlier cars right up to the 2000GT.
Interesting to have 2 x Toyota based vehicles and no Mazdas.
My question is; Is this it? Is this the big three from Japan?
gallery_3_5684_45195.jpg
gallery_3_5684_14790.jpg
gallery_3_5684_7795.jpg
  • 2 weeks later...

Hybrid isn't a bad thing if it's done right. Regenerative braking, an electric motor spooling a huge turbo from whatever RPM you want, like some electronic anti-lag, plus extra energy recovery on wastegated gases... that would be next level shit.

Edited by Skepticism

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...