Jump to content
SAU Community

Recommended Posts

Next Financial Yr Forecast (depending on Japanese auction results - depending on supply and demand)(kept at Grade 4B standard):-

* Non V-Spec - down 7%

* V-Spec - down 4%

* M-Spec - static

* V-Spec II - up 2%

* V-Spec II Nur - up 5%

* M-Spec Nur - up 7%

* V-Spec N1 - up 8%

* V-Spec II N1 - up 10%

** 'Tis my own time capsule for observation purposes Lol

*** As cars get older, the spectrum of quality gets wider

**** I hope there's no GFC 2.0 or oil embargo to fark this all up Lol

  • 2 weeks later...

If the fed government changes the import rules later this year I can really see BNR34 and other cars tanking in price. Instead of the 16 year old R34 I guess lot of people will just get the R35 for 50-60K.

  • 4 weeks later...

I'm going nuts over this same issue :wacko: . I miss my GTT too much so I've been looking at a 34GTR vpsec for the last few months.

Last option is to import one.. But as you guys can imagine I'm gettin a lot of resistance from family and friends saying dont spend so much on an old car.

Also I heard rumours about govt dropping import duties since the aus car manufacturers are shutting down their plants.

Will the 34GTRs retain their value? How much should I be spending on a clean one? I'm only lookin at V-spec and above. Preferably blue. :woot:

I know this is a month-old post but I thought I'd share my experience.

I was in the same boat as you, it was really difficult to find the perfect 34 GTR locally. I wanted a V-Spec or better, low km example, and it had to be blue. I gave up looking and contacted Ben over at J-Spec to get the ball rolling on an import. It was a tough decision to make at the time, but looking back it turned out to be 100% the right move. It can be daunting when you have to wait 3 months to take the car home, not to mention having to send tens of thousands of $ overseas, but with a good importer they'll make the process so seamless that you stop worrying pretty quick.

Long story short, I now have an immaculate grade 4.5 Bayside Blue V-Spec, with 37,000 genuine km complete with a full service history (I'm talking every single service sheet since brand new). It cost me around $56,000 landed and complied which I thought was very fair considering I knew of 3 similar examples that sold locally during my wait time for $60,000+.

Big shout out to Top Secret Imports here in Sydney as well, they made an otherwise painful compliance process super bearable. Awesome guys to deal with.

  • Like 1
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...