Jump to content
SAU Community

Recommended Posts

I'll be coming from blacktown sorry for the delay been driving all arvo. Happy to meet anywhere you guys do just let me know time and place please. M4 maccas is fine just let me know if you mean the city bound side or the opposite side

Cheers!!!

Ok well this might work out perfectly.

There's a maccas on Windsor road in northmead just off of the m2.

We can meet there, I will be able to give you a few hours notice but no promises if the time will be favourable lol.

OK, sorry was out doing reconnaissance work and had a 500km trip yesterday so missed all the excitement.

Thanks for doing this Hadouken, hope the boxes weren't too big.

Yeah, Gundagai at some ungodly hour I guess sounds fine to me.

Txt me on your progress and ETA.

And latest from IM:

Mate can you please tell people to hold off coming in til I let you know it's all sorted and ready to go

we had 200+ orders in this shipmnet, we're still sorting through it.


Cheers,

Aaron
IMPORT MONSTER

But Hadouken must have done some smooth talking, cos he got the mats!!!!!

Either that or the knuckle dusters and baseball bat!!!

Must have a full load now then....what with the mats and your tickets :rofl2:

Seriously though......good work, much appreciated by many of us.

And of cause Ikeya in Melb is way different to Ikeya in Sydney??? Be pouring rain on Boxing Day, so maybe umbrella's?

And the same, Merry Xmas to all, Santa got me a couple of under bonnet mats :rolleyes:

Now just need the Hadouken sleigh to bring it on home!!!

BTW how big are the boxes?

Hope I answered you in the PM SCRMER, it will be all good very soon I hope. I will talk to IM and see what the go is.

And thanks Hadouken......good to meet up even if it was at midnight under a seedy street light :yes:

If we didn't know any better you'd think it was a 'deal going down' :woot:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...