Jump to content
SAU Community

Recommended Posts

A friend of mine years ago ducted his R32 N/A intake into his cabin. Into his cabin. His thinking was when he turned on his A/C, the engine would breath in the cold air, get some performance, he ran without a filter as there was no need for one. Spiders and roaches would be squashed and burned if they'd ever get into the intake. But guess what? After the initial shock he got from insane intake noise from the startup rev, instant regret 30 seconds of driving it hahahaha, and of course, he had to return everything back to the way it was, but with a large hole in his firewall.

There are flexible stainless steel piping available, you could get the correct piping diameter with some coupling for your setup. No need to worry about piping angles. See here:

http://www.summitracing.com/int/parts/wlk-49033/overview/

There is a panel under the stock air filter, if you would take a look at it, there is an outline for turbo piping. You can drill a hole there for either piping your pod, or to let ambient air in. There is a tutorial I think somewhere in the forums.

Do whatever you want to your car, the itch of not doing it when you wanted to do, can turn into a rash. Just don't get hurt or have anybody else hurt. And of course, be prepared for "I told you so, comments." Goodluck buddy.

  • Like 2

haha, would love to see a down shift backfire through the intake. that would wake him up.

i actually wanna see pictures of that.

Sorry mate, there were no photos, this was like in 2001. We didn't even have digital cameras back then, just the film ones. On this island on that year, internet was just starting to get installed, heck, we still use dial up in many homes. I have photos of another buddy of mine somewhere, I just need to find it, where he installed a 6 foot intake to his Toyota Levin. The same piping as the flexible intake link I posted, but at 2.5" diameter. It was way cheaper back then, now it costs twice as much. I'll post it tomorrow as I am logging off from work, such fun times haha.

A friend of mine years ago ducted his R32 N/A intake into his cabin. Into his cabin. His thinking was when he turned on his A/C, the engine would breath in the cold air, get some performance, he ran without a filter as there was no need for one. Spiders and roaches would be squashed and burned if they'd ever get into the intake. But guess what? After the initial shock he got from insane intake noise from the startup rev, instant regret 30 seconds of driving it hahahaha, and of course, he had to return everything back to the way it was, but with a large hole in his firewall.

Reminds me of the guys who used to fit DCOE Webers onto their minis. The intake trumpets used to come through the firewall into the cabin. Then again, intake noise was half the reason people bought Webers, and in those days a Mini was far from quiet anyway, so the Weber conversion was nothing but win.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...