Jump to content
SAU Community

Recommended Posts

Looking for EOI at this stage...

A new business adventure is looming and I am looking at a number of options...

Car Build history can be seen under "motorsport builds"....

As can be seen... LOTS spent over a 3 year build...

pm me for further info if required....serious enquiries only please...

post-74499-0-27230400-1439544629_thumb.jpgpost-74499-0-00921400-1439544673_thumb.jpgpost-74499-0-72266700-1439544801_thumb.jpgpost-74499-0-51493900-1439544874_thumb.jpgpost-74499-0-11229100-1439545003_thumb.jpg

Build thread

http://www.sau.com.au/forums/topic/417823-r32-gtr-drc-build/

120K+ + spent... hence my request for EOI's... sell price will depend on what someone wants to pay for it I suppose...but I'm guessing in the current climate it would go for circa 60K...again, its worth as much as someone actually wants to pay for it..

Some brief details below:

Brembo f40/f50 calipers( 355 front rotors/328 rear rotors)

DMS suspension

Haltech

-5 turbo's

N1 crate engine

Twin plate

OS&G gearset

Compomotive

etc etc

PM for further info and details/mobile no... happy to discuss with any potential buyers..

cheers

If only i was one of the 3 to win a share of the 20 mil xD this would have been one of the first things i would buy. Looks great, just went through the build thread! GLWS

  • 2 months later...

Race car is now on my105.

see link below..

http://www.my105.com/ListingDetails/p/1/k/nissan/id/16220

Looking for 45k (also have car trailer and other parts that could go with the car if required)

Additional new build shots can be seen on my basic website below

deleeuwracing.wordpress.com

(you will have type this into your browser)

please pm me if you require any further info/details

cheers

Chris

  • 2 months later...

Guys,

My new business venture is getting closer and closer so I have dropped the price again.... :(

42k ( negotiable)..

I have also added a bit more detail below and some more pics

Recently Completed Build
Build History ( can be viewed under new build photos/video tab) see below
post-74499-0-93245200-1455162578_thumb.jpgpost-74499-0-76478800-1455162605_thumb.jpgpost-74499-0-70991200-1455162629_thumb.jpgpost-74499-0-09369300-1455162644_thumb.jpgpost-74499-0-97243500-1455162666_thumb.jpgpost-74499-0-09247800-1455162691_thumb.jpg
Build Details :
CAMS LOG BOOKED CAR:
Category 3C REGISTERED CAMS TARMAC RALLY CAR
Components:
FULL TARMAC RALLY SPEC ROLL CAGE
RECARO RACE SEATS( Driver/Navigator)
FRESH RB26DETT N1 CRATE MOTOR ** appropriate engine no can be confirmed..(approx 8000klm)
GARRETT 2860-5's (with uprated actuators) **brand new
Haltech ECU **brand new
SPLITFIRE COILS WITH BUILT IN IGNITORS **brand new
NISMO COPY OIL AND POWER STEERING COOLERS **brand new
SARD 660CC INJECTORS
100mm TUBE AND FIN INTERCOOLER **brand new
ARC AIR INTAKE BOX **brand new
KOYO RADIATOR **brand newew
WALBRO 450 E85 FUEL PUMP**brand new
DO LUCK G SENSOR**brand new
EXEDY PUPP TYPE CERAMIC TWIN PLATE CLUTCH AND LIGHTENED FLYWHEEL **brand new
OS GIKEN CLOSE RATIO GEAR KIT
355mm x 32mm front rotors -328mm x 32 rear rotors
BREMBO F40/F50 CALIPERS
PAGID BLUE FRONT AND REAR PADS
50mm DMS SUSPENSION **Just rebuilt
245/40R17 A050M Advan's
COMPOMOTIVE 17 X 18 TH2 +30 RIMs
***Race Car trailer
***2 x Stilo lids
***2 x 3 piece suits
plus some spares etc etc... everything can go as a package
**If your not in WA its definitely worth a flight over
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...