Jump to content
SAU Community

How Do I Become A Part Od Sauwa Member

frostyboy

By frostyboy,
in Events

 Share

Recommended Posts

RB335 Rising Star

RB335

Posted
Posted (edited)

There really is no Club so to say to become a member of. I was not around in the heyday when it was much more active and there was more of a community.

We have recently had a couple of meets though following some posts :

image.jpg

IMG_7638.jpg

IMG_7678.jpg

Edited by RB335
  • Like 2
owen1r Collaborator

owen1r

Posted
Posted (edited)

Keen, know of at least 3 others who would also be.

There's been a few of these threads, plenty of interest I guess all it needs is someone to organise it. Anyone like to put their hand up?

Edited by owen1r
  • Like 1
Nick_GTR Explorer

Nick_GTR

Posted
Posted

I guess that the frustrating part about going to the effort of organising something... I'm sure though considering it seems there are a few people interested in getting this back up and running, if a commitment is made, people will turn up

t_revz Grand Master

t_revz

Posted
Posted

A few of us have organised dinners and meet n greets and it was the same 6 or so regulars putting their hand up. Bit hard for me being in bunbury but couple of us have travelled up plenty of times for events. Cruising around up there doesn't interest me due to the long drive both ways but I come up for other events. Unfortunately there aren't any regulars on here anymore

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...