Jump to content
SAU Community

Recommended Posts

I'm looking for a very clean example of an R32 GTR. I am in contact with import agents in Japan but am also looking within Australia to potentially save time/money.

The car needs to be as standard as possible (interior/exterior) and the lower the kms the better.

I am willing to travel interstate if you have the right vehicle. I am located in Melbourne.

Thanks for your help!

Link to comment
https://www.sau.com.au/forums/topic/459962-wtb-immaculate-r32-gtr/
Share on other sites

I've seen that one, unfortunately it is out of my budget.... its seems the owner has a premium on it due to it being a Nismo edition.

And the fact that it's done 16,500 kms....... I've inspected the car and the mileage is genuine.

Bob.

  • Like 1

And the fact that it's done 16,500 kms....... I've inspected the car and the mileage is genuine.

Bob.

I have no doubt the car is amazing... but a bit too pricey for me.

The market is slow, even in Japan. I guess I'll just have to keep waiting

What's your budget

Depends on the quality of the car and specs. Normal GTR vs V-spec etc. Dont particularly want to spend more than 35-40k but in saying that I may spend up to 50k for the right car.

I bought my BCNR33 from Global Auto - as well as the AutoSelect 34GTR - dont expect a bargain - but you will find some amazing cars.

Nothing rings more true in the saying "You get what you pay for" when talking GTR.

Dan

Check out global auto in Japan

They stock some of the finest gtrs, prices have gone up so be prepared to pay upwards of 2'500'000yen plus to bring it here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...