Jump to content
SAU Community

Wtb 1997-1998 Series 3 R33 Gtr V-spec

Mr_GaZZa

By Mr_GaZZa,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

Mr_GaZZa Rising Star

Mr_GaZZa

Posted
Posted (edited)

Hi Guys,

I am looking for a silver series 3 GTR V-spec, must have the proper headlights, bumper etc.

Must have Japanese papers such as de-registration and auction papers.

Interior = must be close to stock with no holes in the dash board etc.
Exterior = must be straight and clean, but doesn't need to have stock rims, suspension etc.

Driveline = stock or modified

I'm located in W.A, I may travel interstate for the right car.

and lastly i'm not in a rush, already have a very nice daily + a work 4x4.

Cheers

Edited by Mr_GaZZa
Link to comment
Share on other sites
No Crust Racing Grand Master

No Crust Racing

Posted
Posted (edited)

I'm in the same boat (sorry to thread hijack) and I'm in Vic so if anyone has one over this way please let me know.

Have found this: http://www.sau.com.au/forums/topic/459263-series-3-r33-gtr-for-sale-melbourne/

And this so far: http://www.sau.com.au/forums/topic/459795-vic-fs-1997-series-3-r33-gt-r-30k-firm/

Good luck on your hunt.

Daz also has a pretty nice one :)

Edited by ActionDan
Link to comment
Share on other sites
Mr_GaZZa Rising Star

Mr_GaZZa

Posted
  • Author
Posted

Hi Guys,

Thanks for your reply's.
I am not really looking for a white skyline, I had a white GTS-T ages ago and personally I think there are just so many out there and I love the look of the silver :)

That silver one in Victoria looks fairly nice, however is at the high end of the budget and considering I have to get it in W.A / get it over the pits, its not something I will jump at.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • klutched
      GOT SUM's RB34

      By klutched · Posted

      This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • sonicii
      Newbies

      By sonicii · Posted

      215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
×
×
  • Create New...