Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering if these endlinks are worth their money as opposed to the supplied somewhat crude looking endlinks?

(It's for an adjustable rear end swaybar on an R33 GTST)

http://www.whiteline.com.au/product_detail4.php?part_number=KLC109&sq=12993

Cheers

Supplied endlinks

post-33912-0-46789500-1443372802_thumb.jpg

Edited by Torques

Are they worth the money? Possibly not, depending on how much value you place on money more than any other consideration. If you asked the question "do they do anything?" then the obvious answer is, yes. They are like any other solid joint. They don't allow any slip before transmitting the forces to the suspension component. The reaction of the bar to cornering loads is sharper, quicker. Better. Worth the money? Probably. I haven't been able to justify buying them to myself yet.

The HD ball link is a lot nicer and more durable than the horrible loop style arrangement.

If you purchase a Whiteline front and rear bar kit for the R and S chassis cars now; they actually include the HD ball links.

They also deal much better with angular misalignment than the loop style ones; as they often just pop the bush out of the eyelet.

I can supply these for a pretty decent price if you're interested; shoot me a PM.

urrrgh...those whiteline ones are like a lot of their stuff, overpriced for what they are.

Hardrace are good gear

http://www.hard-race.com.au/index.php?route=product/product&path=25_28_687&product_id=180

fair enough...but the Hardrace ones are half the price of the whiteline ones, what's your definition of expensive?

Yes, you're right .. the Whitlines are very pricey and don''t look that convincing.

I also found these:

http://www.ebay.co.uk/itm/2-X-NISSAN-SUNNY-N14-1990-1994-REAR-BACK-ANTI-ROLL-BAR-DROP-LINKS-/130864103104?fits=Car+Make%3ANissan&hash=item1e781bbec0

http://www.ebay.co.uk/itm/NISSAN-PATROL-1991-1997-FRONT-PAIR-STABILISER-ANTI-ROLL-BAR-DROP-LINK-x-2-/291282784503?fits=Car+Make%3ANissan&hash=item43d1ce90f7

But am unsure what dimensions (length) I need

Edited by Torques

I think you're mistaking the pictures of the basic Whiteline ones that come with the bars and the uprated Whiteline ones that cost some coin.

Hmmm .. aren't these the ones?

http://www.whiteline.com.au/images/products/KLC109.JPG

They look a bit skimpy at the connecting link (the straight part) but maybe I'm wrong.

About AUD 150 in the UK and that is after a 10% discount :(

Edited by Torques

Funny you should mention that, i have heard vague rumours of them breaking. Not enough to make a "thing" of, but, just that i had read that a few times before so could be something to it.

I mean for the price it should be top notch quality really ... it's a lot of money, almost what I paid for the sway bar itself

Funny you should mention that, i have heard vague rumours of them breaking. Not enough to make a "thing" of, but, just that i had read that a few times before so could be something to it.

I think they only look skinny in the middle because the ends are so bulky. I mean, face it, they don't look like they are made of smaller material in the middle than any normal end link. That's got to be ~8mm threaded rod at the connection there.

The connecting threads are M10.

The only "Failures" I've seen are the result of people not tightening the locking nuts on the threaded section or on the aluminium "Turnbuckle" section; which allows the tread to fret, and eventually fail.

OK, thanks ..

Would anyone know how much 'preload' there is on these bars?

I mean how much do I have to adjust the length of the connecting links?

(with the car on the ground)

The connecting threads are M10.

The only "Failures" I've seen are the result of people not tightening the locking nuts on the threaded section or on the aluminium "Turnbuckle" section; which allows the tread to fret, and eventually fail.

  • 2 weeks later...

Yes, sorry I didn't made my question clear enough.

I was concerned about the length adjustment of the end-links.

There's no such thing as "pre-load". With the car on a level surface there are no forces acting on an ARB.

I guess the best (most centralised) adjustment will depend on your ride height. Realistically the setting you're looking for will be to ensure it doesn't bind/hit anything at your max bump or droop likely to be experienced.

The other consideration is that you might tweak the length of the links depending on which hole you have the bar set to. Probably only talking ~1 thread adjustment there though!

I bought a set of the "expensive" Whiteline ones off Dale because the ones supplied with the bar sat at a bit of an awkward angle. They have withstood a hammering on the track with the weight of my 1800kg Stagea on slicks being thrown into corners so I don't think they are too fragile...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...