Jump to content
SAU Community

Recommended Posts

joel

 

 

Freebaggin,

 

What specs A/Rs is your turbo, and what  motor?

It's all above.

Joel,

No split dump.

I'm much more confident it will make 300+ with more boost and cams (I'm just not going to try for a while as it has stock pistons and I drive it every day).

Tim has has very little to do with my setup for some time now and is probably pretty unfamiliar with what turbo he actually got me. I only run a bit over 17psi and get 280rwkW, plenty more to come. Look at Whatsisname's power with the boost increase from 14 to 23?? psi, 250 to 300 (OK, 299.1 or something), give or take some other bits and pieces, but not a huge amount.

YEah sorry Clint, but it along the same lines as your thread tittle. But please tell us to piss off whenever you want :D

Freebaggin,

 

What is the .63 housing off? VL???

What engine is your turbo on?

Not 100% sure what exh housing. 2.5L, full boost by 3400rpm, power drop off on dyno above 7000, but on the road still worth revving to 7300rpm, so 4000rpm odd rev range is good for me.

I have an RB25DET

I am running a 56 Trim T3/T04E (Flows 65 lbs/min). It's got a .60 compressor housing, .63 AR exhaust housing, and a stage IV 76 Trim exhaust wheel. It's got a standerd Bushing center housing. Runing Stock exhaust manifold with an adaptor box for the 38 MM external wastegate. I don't see boost till 3K (5 PSI) and full boost comes on at 4200 in 3rd gear. It comes on really strong all the power at once! I am only running 10 PSI and still running the stock RB25 SMIC intercooler.

Once My PFC and Q45 MAF comes I am going to fit my FMIC on and run more boost till the injectors are maxed out.

I guess a Ball bearing Turbo will make boost 500+ RPM's sooner. Must be nice.

How about an adjustable cam gear? How much would that help?

Clint, if your having troublechoosing a turbo, go see Shaun down at BoostWorx. Im sure he could recommend something, based on what you want from your setup. He always listens to what you have to say. Great guy :D

If you want his number or address send me a pm. :)

I agree Darren. Clint, give Shaun a call and see what he thinks.

Had a quick peek under your bonnet on Sunday Darren, that motor is a total 'sleeper', the engine bay looks stock as :)

I had a peep under Clints bonnet over the weekend - will be a absolute weapon

I reckon Freebaggin is on the right track with the turbo selection, if anyone can come up with a turbo to suit your applicaztion on paper, he can, as he put ALOT of time into selecting his and graphing almost every available option to suit RB25

Can't wait to see it in action, cheers for letting me use the hiost mate, thanks heaps

Chris

0.82 a/r rear on the rb25 might bring boost on 2 early.

I got 0.87 a/r rear and 0.70 a/r comp garrett on internally stock rb25 and it hits 1 bar by 4000rpm and can still torch the tyres in 2nd and 3rd when running 1.4 bar when boost comes on and sometime when running 1 bar even. With cams, headwork etc i wouldnt go 0.82 coz you will just have a tyre frying car which can never put the power down to the ground on normal street tyres.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...