Jump to content
SAU Community

Recommended Posts

Here is the deal:

Princo DVD Media for $36, with every spindle of 50 sold $2 will be donated to SAU.

-----------------------------------------------------------

PRINCO DVD-R A-GRADE 4x 4.7GB 50 TUB

General Specifications

Ver 2.0

Disc Dimension

Thickness 1.2( +0.3/-0.1 )mm

Diameter Outside ø120( ±0.3 )mm

Inside ø15( +0.15 )mm

Use area ø48 - 116 mm

Format

Track Configuration Spiral

Track Pitch 0.74µm

Direction of Rotation CCW ( read side )

Capacity 4.7GB

Environment Condition

Operating Temperature -25C ~ 70C

Humidity 3% RH ~ 95% RH

Storage Temperature -20C ~ 50C

Humidity 5% RH ~ 90% RH

Technical Data

Unrecorded Reflectivity 70%

Redial contrast(RC) >0.05

Recorded Reflectance( Rtop ) > 60%

Sensitivity 9 ~ 12 mW(1x)

Wavelength of write 650 nm

Wavelength of read 650 nm

Jitter <8 %

PI Error < 280

I3/I14 > 0.15

I14/I14H > 0.6

------------------------------------------------------------------

To give you an Idea RRP is around $AUD50...

this is http://www.auspcmarket.com.au/ prices

Blank 4.7Gb DVD-R Media, 4x rated, pack of 50 discs, Princo brand A-Grade white-top

CS-PRINCO4X-R50 In Stock $55.00

is Princo A-Grade the best....(many think so)

http://forums.whirlpool.net.au/forum-repli...es.cfm?t=207260

I have many many spindles available, of course you can pick them up from me if you live in SE QLD, or for interstate buyers even after postage it will still be cheaper.

  • 2 months later...

for everybodys info - i bought these from nizman and they rock!! as good as the sony media i usually buy, i will only be getting princo from now on (oh, and the surface rocks to write on).

these burn nicely @ 8x too, in a nice unit such as the Pioneer A108 with the "non-official" bios flash :cheers:

this can be obtained here: http://flashman.rpc1.org/Firmware/PIONEER/...R-108/STANDARD/

You'll need the DVDFlash utility as well to write the bios to the drive: HERE -> http://flashman.rpc1.org/Firmware/PIONEER/...RFlash_v2.0.zip

s|!m payment method is COD.

predator can you hook me up with that "non-official" flash please...as I ave dat burner woohoo

allright coolio, will get some when I get paid next :mad:

  • 3 weeks later...
  • 2 weeks later...
  • 4 months later...

My company:

www.computerforce.com.au

Email us if you see a better price in WA and we will do our best to either *edit* *edit* the *edit* and get them cheaper for you the crazy *edit* *edit*

:D

PS: I will do a similar deal where every 50pck of Princos I sell I will put aside $2 then send in the donation.

- Adam

  • 4 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...