Jump to content
SAU Community

Recommended Posts

Interesting timing for this thread....for those that think maybe the rules are a bit paranoid or tight here.

On Friday Google was held responsible for defamation by the High Court because it provides links to defamatory material.

Extract from the SMH article covering it, and the full link: http://www.smh.com.au/technology/technology-news/google-responsible-for-linking-to-defamatory-websites-australian-court-20151101-gko9l8.html

The South Australian Supreme Court this week found that Google is legally responsible when its search results link to defamatory content on the web.

In this long-running case, Dr Janice Duffy has been trying for more than six years to clear her name and remove links to defamatory material when people search for her using Google.

The main culprit is the US based website Ripoff Reports, where people have posted negative reviews of Dr Duffy. Under United States law, defamation is very hard to prove, and US websites are not liable for comments made by their users.

Since it was not possible to get harmful or abusive comments removed from the source, Dr Duffy instead asked Google to remove the links from its search results. Google removed some of these links, but only from its Australian domain (google.com.au), and it left many of them active.

Imagine trying to police Google, what a nightmare .

If Google and other similar companies were required to remove all of the possible litigious comments from web sites, it would be like a Cyber desert ?

As the US is VERY litigious, you would think no one would be game to write anything on Google US, well unless it was warm and cuddly , how boring . Freedom of speech, were does that start and finish ?

Where did you get the block from Pete?

The shop got it, it was supposed to have all of the right tests , X-Rayed, Acid wash, Sonic test , hot tank , so if it was done right you would expect a good block.

Anyway, it should only be a few days before the results are back and I will post them on the coolant thread

Off topic again, whoooops :blush:

I was trying to keep on topic as the question was really related to the fact that sometimes an engine builder often relies on many third parties to prep and check different components. Sometimes their assembly isn't to blame and all duty of care is taken.

Sometimes customers bring their own parts or have their own ideas on setups which the work shops have no real r&d on which complicates things further.

I, like a lot of people on here have a lot of exposure to these sort of scenarios for over 20 years and also remember the days when workshops had a setup with the r&d which just worked and you would go in and get it built. This held the workshops more accountable and they were happy to take the responsibility.

Tuning is another complex issue where people go for retunes to another workshop and then get low numbers and then advertise that the workshop are crap tuners when it obvious that the original tune was a marketing tune rather than a good one.

Or the scenario that someone comes for a dynotune and tells the workshop that he has a full forged engine and then the tuner pushes the engine at the request of the customer and the engine throws a rod, then the customer badmouths the workshop as I have seen an evo do with a supposably built engine but stock rods which went through the courts.

Not making excuses for a blatant poor workmanship, but there are more than a few things that should be considered when naming and shaming. That's why its dangerous for a forum to entertain such a thread IMHO.

Problem is for every truth there are many more untruths in this scene, and don't we all know it, and they eventually end up being workshop wars full of inaccuracies.

My 2 cents anyway.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...