Jump to content
SAU Community

Recommended Posts

Since I only buy nissans (or datsuns!) these days, and a skyline's not the car for this job.....

Does anyone know anything about the "March 3HB Super Turbo"? Apparently its a kei car made from 1989 (making it a handy 15 years old).

Has anyone seen an 89 model for sale? Approx price in yen?

Link to comment
https://www.sau.com.au/forums/topic/46073-march-super-turbo/
Share on other sites

ahh spectacular, I actually wanted an auto but thought they were all manual :P whats the price on the window there?

do you watch a lot of the auctions, I was hoping there might be a few around

It can be in really poor condition as long as the engine and transmission are OK ;)

Link to comment
https://www.sau.com.au/forums/topic/46073-march-super-turbo/#findComment-936581
Share on other sites

about 200,000yen with 28,000km but this is a H3 dude...

OK Im a simple person, whats the difference between H3 and 3HB or did I just write down the wrong thing?

Thanks for your help with my dreaming :P

Link to comment
https://www.sau.com.au/forums/topic/46073-march-super-turbo/#findComment-936600
Share on other sites

its a funny world, Autospeed did a review on one this week :)

--------------------------------------------------------

It seems the ‘hot hatch’ label is applied to any ol’ shopping trolley with slightly more power than usual. But believe us when we tell you this hatch is hot.

The Japanese-market Nissan March Super Turbo – which boasts a supercharger and turbocharger – can easily blast its way to 100 km/h in the high 7 second range. In real world driving, that’s fast enough to keep pace with many high-profile turbocharged guns. No need to be intimidated when you pull up alongside a Galant VR4, Liberty RS or TX3 Turbo!

So how can this humble looking hatch run with the performance giants?

Well, under the bonnet lives Nissan’s fabulous MA09ERT 930cc in-line four. It’s not a particularly sophisticated engine with just a 7.7:1 static compression ratio, SOHC and 8 valves, but its bolt-on forced induction hardware is nothing short of amazing. The March Super Turbo employs one of the few OE supercharger/turbocharger set-ups in the world.

And it works a treat.

At low-to-mid revs, the 930cc four is boosted by a positive displacement blower (see Supercharger Steal - Part One for details). At higher revs, however, a relatively large turbo kicks in to give great top-end performance. Note that the transitional stage is very smooth thanks to a relatively simple supercharger/turbo control system. At low rpm the turbo blows through the supercharger which is effectively ‘free-wheeling’. Then, at high rpm, the supercharger is disengaged by an electro-magnetic clutch and the turbo feeds the engine via a supercharger bypass passage. Airflow through this passage is controlled by a differential pressure valve which begins to open as the turbocharger nears operating speed.

Give it just a whiff of throttle at low rpm and you’ll see the supercharger deliver up to 7 psi of boost. This means wonderful part-throttle performance but, curiously, flooring the throttle at this stage doesn’t necessarily equate to greater acceleration. At more than 4500 rpm, however, the turbocharger steps in and boost pressure swells to 13 psi. That’s when it’s go-go-go!

With 81kW at 6200 rpm and 130Nm at 4800 rpm the March Super Turbo – which weighs just 770kg - is an absolute rocket. Performance varies depending on the temperature of the top-mount air-to-air intercooler, but high 7 second 0 – 100s are easy. Note that, as far as we can determine, the March Super Turbo is available only as a 5-speed manual.

With supercharged torque available at low revs, there’s little chance of bogging down off the line – the only concern is wheelspin caused by too many revs. We discovered the standard 175/65 13 tyres are easy to light up, despite fitment a front LSD.

But one of the biggest downsides of the March Super Turbo is its unrefined chassis.

Underneath, it’s obvious this little flier is built on a budget platform – the primitive beam rear axle is a giveaway. Still, the ride is reasonably comfortable and the chassis doesn’t do anything unexpected when flung through an urban corner – there’s a bit of understeer but that’s it. There is, however, quite a lot of reaction through the steering wheel when accelerating hard on an undulating surface – typical high-power front-wheel-drive stuff. Note that our test car also had worn-out dampers.

The March’s non-assisted steering feels fine when you’re cruising along but it loads up massively at parking speeds and when you fling it around. The difference in weighting is dramatic.

With ventilated discs up front and drums at the rear, braking performance was fine during our test. There is no ABS.

Chassis rigidity wasn’t exactly a forte for hatchbacks in the 1980s – and the Nissan March is no exception. Expect the usual body jiggles, tailgate rattles and creaks. This aside, the cabin is accommodating and comfortable. The March can seat four people with surprisingly good space – sure it’s a bit tight overall, but it’s not an imposition to sit in the back. The Super Turbo also gets flashy sports buckets which are comfortable and supportive.

Standard interior features include power mirrors, a graphic equaliser and air conditioning. There’s a decent array of gauges as well. The main cluster houses an easy-to-read speedo, tacho, fuel level and coolant temp gauge while a central gauge pod contains a clock, voltmeter and boost gauge (marked in millimetres of mercury). The only immediately noticeable absentee is power windows.

Visually, the March Super Turbo is pretty anonymous. Viewed from the rear you could be forgiven for thinking it’s an everyday Pulsar – albeit slightly downscaled and with a rear spoiler. At the front, however, the Super Turbo looks at you with its prominent fog lights and bonnet scoop. Subtle side skirts and wheel arch flares, 13 inch alloy wheels and Super Turbo stickers are the only other remaining eye catchers. Painted black, the March Super Turbo looks tough enough to raise interest – but not enough to deter a potential traffic light challenger!

We really cannot overstate the speed of this little car. To put things into perspective, it’s totally within its capabilities to wipe, say, a Hyundai Excel with an aftermarket turbo kit. Oh, and you can buy an entire Nissan March for the cost of just the Hyundai’s turbo kit!

Available from Adelaide’s Yahoo Motorsport for AUD$4600 (plus ADR-ing), this March Super Turbo is one of the more expensive 15 year old import hatches we’ve tested – but it’s also by far the most serious. Our test vehicle had 113,000km on the clock and, at the time of photography, was in need of some body detailing. Note that the March Super Turbo was released in Japan in 1989 and was axed in 1992.

Unfortunately, finding suitable parts will be a hassle. The EK10-series March was never officially delivered to Australia, which means all body and interior parts are very difficult to source. The same goes for that fantastic supercharged/turbocharged engine – it’s an orphan. We should say, however, the engine and some other design elements look very similar to local Pulsar/EXA models – we wouldn’t be surprised if some parts were interchangeable.

Now let’s veer off the rails for a moment...

If you like the idea of wasting HSVs and WRXs, the March Super Turbo offers plenty of tuning potential. The stock air intake looks quite restrictive, as does the press-bent and heavily muffled exhaust system. Improving intake and exhaust flow could probably give 100-odd kilowatts in total. And what about the top-mount ‘interheater’ and boost pressure? Well, whack a larger ‘cooler in the nosecone and up the turbo boost maybe a couple of psi and you’d have one insanely quick little beast. Fit some grippy front tyres and you’d have a 6 second 0 – 100 km/h machine – guaranteed.

Serious performance is there for the taking!

Link to comment
https://www.sau.com.au/forums/topic/46073-march-super-turbo/#findComment-948741
Share on other sites

there's plenty of march super turbo's running around in the japanese Kei car championships... and the H3 evolee's talkin about means H3 = 1991, you're lookin for an H1 car which is 1989.

i believe you are after this...

http://www.j-garage.com/nissan/march/2410.htm

How about a nice lil 1989 Nissan Pao Campustoppo :)

Link to comment
https://www.sau.com.au/forums/topic/46073-march-super-turbo/#findComment-948752
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...