Jump to content
SAU Community

Recommended Posts

Just spoke to the guy conforming a discusion i had 2 weeks ago, and newer model, with more features at a better price, and looks tricker as well :rofl: ...information to follow later today

Ok since there have been a few threads about circuit days... first question is always "WHAT TIMES YOU RUNNING?"

I may be able to get these for cheaper then the list price of $450.00 if i do a Group Buy thing.

So description:

- Small and light gauge

- Records up to 480 lap times!

- Accuracy 1/100 sec

- AutoPowered by internal batteries

- Easily readable Display ( 12 mm digits!)

- Not volatile memory

- Auto-Power OFF

- 1 year warranty

Dimensions

- Weight 85g

- Display dimensions 17 x 43 x 77 mm

Features

Automatic Lap timer. Infra Red Transmitter to be installed at track side and receiver. Records up to 480 lap times.

Some of the extra/new features include:

- downloadable lap times to a PC,

- display best lap time as well as curent lap counter,

- Session time remaining

- lower purchase price ;)

- new larger, clearer screen

Link to comment
https://www.sau.com.au/forums/topic/46099-interest-in-lap-timers/
Share on other sites

Roy - you are jumping the gun. Again. Your doctor can help with these premature issues you have.

Something that was going to be raised at the General meeting was competiton within the club. My thoughts were to have competiton classes within the club. Was going to be calling on you and Geoff for input on this etc.

But lets tackle this hurdle when we get to it. Right now just keep this as a little wanky toy thread! :rofl:

How about this one?

http://www.percul.com.au/index.html

Actually I already spoke about price and they will be around $900 for the basic Kart type and $2000 for the car suitable one with the large readout.

Your's is a good price. When do I see it?

Actually I already spoke about price and they will be around $900 for the basic Kart type and $2000 for the car suitable one with the large readout.

Yeh they look trick, though ony have two inputs which is a shame.... mine has the integral lap timer and 4 inputs wich is still shy 2 or 3 when you look at the things i wanted to monitor...but where does the rice stop..... at a $4000 Motec ADL? :rofl:

top price Roy, I paid onver 600 for mine :rofl:

THey don't do quarter mile or anything like that, basically all the have is a little infra red receiver in the car, and it counts how long between going past the beacon. You put the beacon on the start finish line and it will tell you how long each lap was.

These are a great idea if you are serious about track days, you can see straight away whether you are getting faster or not....without a timer you never know whether you really did get it right....

Dimensions  

- Weight 85g

Ridiculous. I can't afford to have that much extra weight in the car. That would bring it from a Stage 372 Weight Reduction to a Stage 368 Weight Reduction!!! ;):)

j/k :) Yeah, I paid AUD$600 for my lap timer from the UK, and it's pretty much the same thing (this is probably the newer model)... Great price! :rofl:

D00d...motor first...then fun toys ;)

I already have my fun toy, its sitting under my bed waiting to get my car back :D

But i saw these when looking for my "Atari" and remembered Merli/Duncans was more expensive...so i dont need one, but since im talking to the guy i thought id see if anyone else is interested , like Duncan said they are worth their weight (mmm only 85g) in gold for the feedback they give you on whether certain gears/lines are quicker thru corners :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...