Jump to content
SAU Community

Various Gtr Parts

slidinr32gtr
 Share

Recommended Posts

slidinr32gtr Proficient

slidinr32gtr

Posted
Posted

For sale - all parts come warranted and in good order unless otherwise stated.

Call or text please!!!!! 0414596256 can message more photos etc

PayPal, bank transfer and cash on pick up all welcome

-R33 GTR front and rear brembo brakes, slotted rotors and brembo brake pads. Pads and rotors only used for 8,000kms have 90% left $1500

-Tein base height adjustable r32 gtr coilovers. Have been road tested, no knocks or leaks, can go ultra low. $650

-twin Garrett dash 5's with oil drains, no leaks, no smoke, good working condition Very minimal play. Have done 8000km since new $1600

-link G4 ecu (suit all r32/r33 motor) currently has tune for -5's on an rb26

$1400

-Nismo r32 gtr 260km/h cluster. 117,500kms Full cluster no damage all tabs perfect $300 suit early model

-same cluster to suit late model with 140,000kms $300 also

-r32 alloy radiator 52mm thick twin core $100

-Heavy duty aluminium light weight front r32 strut brace $100

-Recaro sr3 genuine drivers reckon able bucket seat and rail $250 (has small tear in top right bolster)

-R32 passenger seat in VGC perfect bolster no fade, holes or poor stitching $300

-r32 gtr maroon bonnet, very straight no dents only slight peel of clear coat $500

-r32 gtr bonnet latch and upright support $80

-100mm tube and fin gtr intercooler. Only marking states 'toyo' $200

-black steel hard twin intake pipe rb26 with silicone hoses, clamps and twin 3A racing pod filters $180

-polished twin turbo pipe both pieces clamps and rubber joiner $80

-rear wheel drive rb26 sump. (Awd sump professionally cut and welded, also painted black) $300

-autobahn 88 brand new 100mm gtr intercooler kit with all piping, silicone hoses and clamps etc, never used! $580

-r32 gtr tailshaft $80

-r32/r33 front transfer shaft $50

-r32/r33 front drive shafts $200 pair (great condition boots and cv's in perfect order)

-R32 push type gearbox removed from 90' vehicle with 117,000kms. Road tested very well, no noises or crunches. $500

-R32 pull type gearbox removed from 93' vehicle with 123,000kms. Road tested very well, no noises or crunches. $600

Located Gold Coast can freight worldwide message for a quote

0414596256post-44496-14486933003836_thumb.jpgpost-44496-14486933164457_thumb.jpgpost-44496-14486933291172_thumb.jpgpost-44496-14486933378978_thumb.jpgpost-44496-14486933499081_thumb.jpgpost-44496-14486933666045_thumb.jpgpost-44496-1448693388478_thumb.jpg

Link to comment
Share on other sites
evvia Rookie

evvia

Posted
Posted

Hi

What cost to SA (Adelaide) for

R32 push type gearbox removed from 90' vehicle with 117,000kms. Road tested very well, no noises or crunches. $500

Nismo r32 gtr 260km/h cluster. 117,500kms Full cluster no damage all tabs perfect $300 suit early model

Mine is a 1990

Cheers Evvia

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • klutched
      GOT SUM's RB34

      By klutched · Posted

      This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • sonicii
      Newbies

      By sonicii · Posted

      215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
×
×
  • Create New...