Jump to content
SAU Community

Recommended Posts

Yep I have the same identical exhaust as Luis, the Fujitsubo

Legal my arse..

I have that exhaust with Scottys dump and 100 cell cat there is no way it is that loud. You can hardly hear it until i am well and truly up it.

Have you conducted your test in accordance with the RMS specs, and ensured that there are no hard surfaces within 20 metres to reflect any sound?

There is no way the Legalis is 114db.

Yep I have the same identical exhaust as Luis, the Fujitsubo

Legal my arse..

I have never heard a Fujitsubo get that loud.

I ran one on my previous M35 with an intake & dump pipe from Scott as well as a Kakimoto de-cat front pipe.

No chance in hell it hit 114db

My current VQ35 under full throttle with only the headers attached, sure.

I did the test at 5000 rpm, and the device was 1m away sitting on the driveway.

Exhaust was facing the street to so no reflecting surfaces.

I get 75 db inside the cabin.

With the windows down I get 85 db

Device is calibrated and gets normal conversation at 65 db so it's pretty good.

One thing... my cat is a single cell , if you get my drift

I'll get a 100 cell bullet cat, that should quiet it down a bit.

Also don't like the explosions of unburnt fuel on freeway driving.

This is what I have now.

post-25026-0-46897900-1452321598_thumb.jpg

Edited by conan7772

Thats a big suprise as i was suprised how quiet my Kakimoto Hypermega N1 is. Ill try and get cabin / exterior sound clip when i can. I also have the 62mm kakimoto silencer that can quiet it even more with no restrictions due to same internal diameter

Yeah but it will be loud and drony if made.

"if made badly or ignorantly"

I am getting a new exhaust made in the next few weeks. I'll try and post up how it sounds when done. I guess i could have just gotten a new dump / flex and joined the Fujitsubo crew but i like tackling things my own way with what i have at my disposal locally. Support the locals folks :)

If the bloke i am using's other work is an indication of what i'm in store for it should be a nice bit of kit.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...