Jump to content
SAU Community

Recommended Posts

Hey guys sorry if I'm on the wrong forum but I need help I have a r33 with the rb20e engine and i just bought a rb25det neo automatic but it has a cut harness but I can get the harness from a manual neo motor. Can someone give me a run down on this swap, the rb20e is also automatic.

Today's been a productive day. My paint man sent me pics of the skirts , far spats and origin roof spoiler painted up and left in the oven. The guys work is 110% and can't recommend him enough. He's also reprinting the front lip as I scuffed it slightly a few months back

2eaiiiv.jpg

1085own.jpg

w21r3l.jpg

Also picked up these absolutely immaculate lancer evo 2 seats. These are in remarkable condition for almost 24years old. I've never had any says apart from oem in a road car so these will be a welcomed change. I wanted something not too in your face as I wanna keep the cockpit colours scheme as close to factory as possible so would never go for red etc

ejct1f.jpg

149mgd4.jpg

Hoping to have the car back on Friday so plan on taking it on a spin down to auto heroes in momdello this Saturday

collect the car from the bodyshop today and im chuffed. Its starting to look as I wanted now bar a boot lip currently being made.

I got the oem side skirts, oem rear pods and origin roof spoiler fitted , aswell as repairing the front lip..

opinions welcomed

post-142244-0-07567400-1454180161_thumb.jpg

post-142244-0-42206200-1454180176_thumb.jpg

post-142244-0-04748800-1454180188_thumb.jpg

post-142244-0-89521100-1454180198_thumb.jpg

post-142244-0-71572200-1454180212_thumb.jpg

post-142244-0-82371200-1454180226_thumb.jpg

post-142244-0-56600100-1454180250_thumb.jpg

post-142244-0-05328200-1454180265_thumb.jpg

  • Like 1
  • 2 weeks later...
Got around to fitting the adjustable suspension arms there on sat. In the rear ive fitted Apex Performance toe arms and camber arms, Ive also fitted Driftworks traction arms. I know traction arms aint really necessary but if i was gonna fit one i may aswell do it right and fit them all. Also fitted in the front are Apex Performance tension rods. Ive kept all the new arms set to the same as factory items for the moment until i pick up some front camber arms and then ill get it all set as i want properly


20160206_151805_1.jpg


20160206_152317_1.jpg


20160206_173834.jpg


Something that bugged me about the recaros i bought were the fact the logos were faded and some of the threads disappearing, they are 20plus yrs old so i decided to get some white fsbric paint and go over the logos. They look alot better now i think. May only ber a small difference but better none the less


20160202_231951_1.jpg


20160202_212927_1.jpg


20160203_202412_1.jpg


My nardi personal grinta 350mm that i bought off andy in planet drift before xmas arrived today. Exactly as described and in excellent condition


IMG_20160209_185221.jpg

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...