Jump to content
SAU Community

Recommended Posts

Up for sale is my R33 GTR v-spec LM Limited.

This is one of only 98 ever made to commemorate Nissan's R33 GTR entries to the Le mans 24 hour race in 1995 where one of the entered cars finished 10th competing with the like of Mclaren F1's.

This being a v-spec makes it one of even fewer than 98 and from the previous owners research possibly 1 of only 14 v-specs. I also believe it is 1 of only 4 or 5 in Australia.

This is a genuine LM Limited with copy of fast check to confirm it is an LM limited.

It is in completely stock standard for apart from the current 18 inch wheels and tyres (roughly 500km old) and a 3 inch dump pipe back exhaust which i fitted simply to put the original factory items in storage to prevent wear and tear.

I would consider this car to be in immaculate condition inside and out and actually still smells new inside.

The BT2 blue paint which only this model was released in is in A1 condition and a beautiful colour. The engine bay is untouched and looks new. I would confidently say this would have to be close to the best condition R33 GTR in the country.

This car has to be seen in person to be appreciated and from research it is the only LM Limited worldwide that i have come across that isnt modified mechanically.

With a low 101000 kms (major service was completed in Japan at 82000km) the engine is very very healthy with only good quality oil used (motul)

It has all the original LM Limited features which include:

N1 front bar ducts

N1 bonnet lip

Carbon fibre rear spoiler (have taken it off to confirm it is the original genuine nissan one)

C pillar commemorative stickers

Absolutely no rust and the car is kept in my garage under a car cover. I have hardly driven this car since owning it.

Every power option works perfectly and it honestly drives perfectly with the gearbox still nice and tight etc.

I believe this car will only go up in value considering its rarity and factory condition and is approaching the 25 year old classic age which has seen the R32 GTR models increase significantly in price and demand.

Will suit a collector and hopefully go to a home that will see it maintained to its current condition.

It also comes with:

Letter from Nissan Japan confirming it is a genuine LM Limited

Printed out Nissan fast check confirming its vin number to be an LM Limited

Spare c pillar stickers

Spare v-spec boot lid sticker

CDR with pictures of car etc

2 original sales brochures

Original v-spec and non v-spec price slip

5 die cast LM Limited models

A plastic build yourself model unopened in box

Brand new genuine GTR spare key in box

plus more bits and pieces

It is a very regretful sale as i will not come across a car of this rarity and condition again but the reason for selling is to use the money for a house deposit.

$40000

For any questions feel free to call me on 0422642319

Price is negotiable

post-12585-0-55940300-1452918976_thumb.jpg

post-12585-0-03460600-1452918993_thumb.jpg

post-12585-0-00218300-1452919008_thumb.jpg

post-12585-0-54050000-1452919021_thumb.jpg

post-12585-0-04195700-1452919033_thumb.jpg

post-12585-0-77832400-1452919052_thumb.jpg

post-12585-0-19285400-1452919067_thumb.jpg

post-12585-0-23135100-1452919078_thumb.jpg

post-12585-0-82231100-1452919111_thumb.jpg

post-12585-0-84761300-1452919300_thumb.jpg

Edited by livewire
  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/462295-r33-gtr-lm-limited-for-sale/
Share on other sites

:worship:

Brilliant car and looks so well kept. I usually laugh at prices 10-15k above the average market prices, but this IMO is worth it. One for a collector.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...