Jump to content
SAU Community

Recommended Posts

Hey all

Recently my brother has bought a R31 station wagon.

Started its life as a non turbo, but has been converted on the same non turbo block to a turbo.

does it have to go through regency now?

Can i just tell motor reg its now a turbo?

Will the insurance company be ok with it being a turbo?

cheers

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/
Share on other sites

I was surprised about a year ago when I found that SA Transport webpage does now list guidelines on modifications, and what is and isn't illegal. For this particular change - adding a turbocharger:

https://www.sa.gov.au/topics/transport-travel-and-motoring/motoring/vehicles-and-registration/vehicle-standards-and-modifications/aftermarket-components

Turbo-charging/supercharging petrol engine vehicles

Turbo-charging or supercharging an engine increases the power of the engine and may increase the exhaust emissions, fuel consumption and reduce the service life of the engine.

Passenger cars and passenger car derivatives (car type utilities and panel vans) manufactured prior to 1 July 1976 and fitted with petrol engines can be fitted with a turbocharger or supercharger to the original manufacturer's engine without DPTI approval.

For cars manufactured on or after 1 July 1976 the fitting of a turbocharger or supercharger requires one of the following:

  • the vehicle is fitted with a Second Manufacturer's plate to demonstrate compliance with all Australian Design Rules
  • the vehicle to pass an IM240 emissions test
  • the converted vehicle is identical to the production turbo/supercharged vehicle.

In all cases a statement of requirements is required and the vehicle must pass a roadworthiness inspection.

Certification from a professional engineer may also be required. See list of qualified engineers recognised by DPTI - MR426 Chartered Professional Engineers 409.4 KB .

I'd imagine these sorts of engineering changes would include checking over whether the brakes are adequate, any changes to the fueling system are within specifications, that adequate exhaust & emissions systems are in-place, etc.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7670660
Share on other sites

  • 2 weeks later...

I thought the general consensus with these cars was to keep N/A's that way, as they're then still P-plate legal, and those are in-demand. Also - the cost, engineering, legalities, and extra police attention of a converted car (and they're probably worth less than a factory turbo, or plain N/A) making it generally better to just buy the turbo car instead.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677510
Share on other sites

I thought the general consensus with these cars was to keep N/A's that way, as they're then still P-plate legal, and those are in-demand. Also - the cost, engineering, legalities, and extra police attention of a converted car (and they're probably worth less than a factory turbo, or plain N/A) making it generally better to just buy the turbo car instead.

Yes, i thought so too. But people still want to do it for some reason..

I guess for them its not about the money or the legalities its about the project, and they can then complain about the whole process and unwanted attention.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677574
Share on other sites

Yes, i thought so too. But people still want to do it for some reason..

I guess for them its not about the money or the legalities its about the project, and they can then complain about the whole process and unwanted attention.

Only makes sense if u have a wreck that u got for fu*k all with all the required parts to raid. Still lots of work though. I still wouldn't do but each to their own.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677602
Share on other sites

Ya I understand what you guys are saying iv had my car for 6 years since on my L's and know that I can drive a turbo I was going to turbo it it more because I have spent a lot of money on it makeing it look they why I want it to look and have growin a attach meant to it and don't think I could sell it I pretty much have all the stock parts to turbo it so know it almost time to take it to the machines to get down

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7678018
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...