Jump to content
SAU Community

Recommended Posts

Hey everyone is there anyone/anywhere that sells the airbag harness to get rid of the airbag light once aftermarket seats are installed? If not I'll just try a 2ohm resistor, would prefer a neat plug if possible though. I've seen posts about NISMO making a harness, can't find anywhere actually selling them though.

TIA

Link to comment
https://www.sau.com.au/forums/topic/462489-airbag-light-with-aftermarket-seats/
Share on other sites

Yes you will get an error, and yes the correct resistor will clear the error.

I assume it's not in an 1993 R32 Skyline GTST, its probably a 5ohm resistor if it's M35 or 2.7 for C34 but I'm not certain

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

Yes you will get an error, and yes the correct resistor will clear the error.

I assume it's not in an 1993 R32 Skyline GTST, its probably a 5ohm resistor if it's M35 or 2.7 for C34 but I'm not certain

Yea it's an M35, R32 was my old car

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

I had a quick look at the 350Z pages the other day and I think they said 2.2ohm or 2.7ohm, will have more of a look.

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

Have you tried Jesse Streeter? He's been good at tracking down random parts for me.

  • 3 weeks later...

Done a bit of reading up on this, and found this thread. Wondering if the DIY in the bellow link would work with our M35's

http://g35driver.com/forums/audio-video-electronics-diy/158005-diy-cancel-airbag-light-proper-way-07-weight-sensor-bypass.html

Done a bit of reading up on this, and found this thread. Wondering if the DIY in the bellow link would work with our M35's

http://g35driver.com/forums/audio-video-electronics-diy/158005-diy-cancel-airbag-light-proper-way-07-weight-sensor-bypass.html

A shame the pics no longer work. I'm going to have a look at my OEM seats and have also asked amayama if they can get NISMO airbag harnesses plus I'm going to look into the 2.2ohm resistor, see which one works out best/easiest.

I have a spare nissan yellow plug if needed. I installed one under my passenger seat as it was hard wired and sourced 2 for my 350z seats. Its a simple install but still need to solder and heat shrink. You will also need to do the airbag light reset procedure to clear light.

Edited by joshm35

I have a spare nissan yellow plug if needed. I installed one under my passenger seat as it was hard wired and sourced 2 for my 350z seats. Its a simple install but still need to solder and heat shrink. You will also need to do the airbag light reset procedure to clear light.

I may end up taking you up on that offer, cheers. Soldering and heat shrinking I can do. Thanks

  • 4 weeks later...

Success! The 2.2ohm resistor for each seat worked. No more airbag light. I just did it this afternoon, will keep an eye on it but don't see why it should come back.

Nicely done!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...