Jump to content
SAU Community

Recommended Posts

Hi all,

Just wondering how many of you out there has ever had an engine go on you, you know, big stuff like cracked pistons, ring lands, rod failures, valve gear problems, head gaskets, etc etc.

If you can state generally what level of tune you had (rwkW) and why you think it happened, it would interesting to know.

Looking forward to the horror stories!

Freebaggin.

Link to comment
https://www.sau.com.au/forums/topic/4625-whos-blown-their-rb-engine-and-why/
Share on other sites

At the 4 6 & rotary nationals in Feb this year, I blew up

my RB26 engine in the R33 GTR.It had around 340 rwkw using

bolt ons like HKS 2540s,FMIC,etc, but the engine itself was

untouched. I did 2 back to back runs, which was silly cause it was

too hot & the oil system must not have been able to keep up.

It ran 11.5 & 11.6 and on the second run developed a loud rattle.

When we pulled the engine down, the no. 4 conrod bearing was

completely missing except for a wafer thin bit left welded to the

crank!It was amazing the whole lot didn't let go through the traps.Also the crank was bent 2 thou & one of the pistons had been bouncing off the head.Keir wilson(R32 GTR 10.5fame) bought

this engine, rebuilt it and ran 10.6 at drag combat with it!!

So, providing they dont throw the rods out of the block, they can

be rebuilt quite easily.On the same day in Feb, Keir was not so lucky with his R32.Oil starvation through the traps welded the crank to the block & KABLOOEEE.

I remember grabing Brenton's Adelaide Clutch ute & hooking down to help him.One of the safety guys came over & passed me a handful of bits off the track.One of the bits was a bit of the block

with san (part of the nissan) on it! What a mess.Other than the Head the whole thing was scrap metal.

Now we both have OS 3 litre engines with larger,baffled sumps.

Hope it dosen't happen again, but when you rev over 9000 rpm

nothing lasts forever.

:flamed:

Originally posted by adam 32

blew up my internally std RB20

too much boost from the T04 and not enough fuel!!

made around the 280rwhp mark i think before it blew

hehehe I told you dont tinkering with boost! :P:cool:

hehehehe... how is your car running now? all fixed I hope:)

cheers

Joe

Guest nismogtsx

I did a couple of valves in cyl no. 2 when the conrod snaped and left the piston at the top... LOL The next rotation the valves opened and they hit the fused piston.... The mechanic who rebuilt had to drill the piston out of the cylinder it was that well fused....

My main point is that with mods the cars run well, but i was doing 230rwkw all the time and the conrods were standard... Now their a Nismo part... Got them fairly cheap....

Guest nismogtsx

I totally forgot my point.

Anyway i did all the bottom end but didnt wait for the rods to come. I got too hasty and re built my motor with the original 100,000km conrods and they lasted 3 months... So thats not bad... But you need to have a weak point in every motor.... Because there's no such thing as bullet proof.....

NOTE: Build it stong and give it heaps when you wear it in so the parts bed in hard and are ready for a hard life....

  • 1 month later...

Engine 1: 145 RWKW T3/4 High Flow Trust FMIC..... Standard Fuel Pump....ang bang rattle rattle.... too lean....

Engine 2: Sheared the cam belt tensioner bolt and lunched the head.... I've been told someone may have replaced the cam belt idler bearing and overtightened the bolt??

Engine 3: Still running hard with 180 RWKW... new owner hasn't blown it (yet)

BIG chunk of #1 piston - down to the ring land - parted company with the rest of the piston, and played pinball inside the combustion chamber. Also broke the top ring and bent an end of it upwards. Amazingly, not outwards, because bore is totally unmarked.

I suspect a dyno run had it lean out and detonate at the top end (fuel pump incapacity), but no proof.

Had a mild build - T3/T4 hybrid, FMIC, only about 115 awkW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...