Jump to content
SAU Community

Recommended Posts

Ok guys and gals.

These are now being produced with a VERY short lead time (one was made over night).

Group buy date has ended, but if you still want one, send me a PM and I can organise something for you.

For those that have ordered one, they are either ready to be picked up, or I am getting them ready to be shipped asap and will let you know when i do so :)

  • 2 weeks later...

Hey Damo,

Mine arrived today thanks. Very happy with the outcome and thanks again for organising the group buy.

Cheers

Rob

Glad you are happy with it Rob :)

I have arranged with my supplier to keep the group buy price as it is.

So although the group buy is now officially closed, these will be an ongoing thing if any one wants one now or later on down the track.

Either reply here or send me a PM :)

  • 2 weeks later...

End product looks great!

If you were referring to the picture of my panel above then it would be fair to say that the photo doesn't do it justice.

Looks way better in the flesh!

  • Like 1

Managed to see one at GTR Festival. I was impressed.

That probably would have been on my car :)

Ah you were talking to Brodie. He was picking up one for Anthony from Dahtone Racing.

  • 3 weeks later...
  • 2 months later...
  • 7 months later...

Hi R32gojira

 

Have you any spare number plate inserts? My number plate is to big.

Or can we have one made.

 

Cheers steven 

12 hours ago, thebluecheeseman said:

Hi R32gojira

 

Have you any spare number plate inserts? My number plate is to big.

Or can we have one made.

 

Cheers steven 

PM replied to mate.

 

These are still available guys.

Its now an ongoing thing with a local supplier of mine.

Prices still remain the same, so get a hold of me if you are keen for one.

  • 3 years later...
On 3/14/2021 at 8:40 PM, cpp said:

hi r32GOJIRA do you still have any r32 rear bar inserts left

Hi mate, unfortunately these were made to order, and the previous supplier had damaged the mold.

So i haven't been supplying these for a while as i just need to get off my ass and get the mold repaired and find a decent carbon/frp guy to to the job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...