Jump to content
SAU Community

Recommended Posts

Hey guys, as my car has gone to heaven all this stuff has no reason to be hording my garage.

Cylinder head – Awesome Condition. Was going to put it on the next time I needed to do timing belt. $250

post-84169-0-88202800-1456210253_thumb.jpg

Block – Shot. If I remember correctly cylinders #6 and #2 down 50psi $50
post-84169-0-31412100-1456210447_thumb.jpg

S2 Turbo – Nothing wrong with it, was a spare for Justin. $250
post-84169-0-55531300-1456210575_thumb.jpg

exhaust manifold $20

post-84169-0-39208300-1456210708_thumb.jpg

Intake manifold $80

post-84169-0-09373900-1456211032_thumb.jpg

2x Valley covers – One is pretty immaculate, the other one has a ding in the top. $20 ea

post-84169-0-84572100-1456211446_thumb.jpg

Radiator shroud $50

post-84169-0-71935100-1456211588_thumb.jpg

Intake Box – made out of 3mm lexan. Looks real good when its in. holds a pod tight and points it clear of the light (poetry) Works well and looks very clean. $30

post-84169-0-78495000-1456211738_thumb.jpg

Door trim runners $50

post-84169-0-29709600-1456211922_thumb.jpg

S2 Floor mats – Really good condition apart from a hole where the left drivers heel sits $100

post-84169-0-54472000-1456212118_thumb.jpg

Rear strut bar $80

post-84169-0-91588700-1456212243_thumb.jpg

Skid plate $40

post-84169-0-60664200-1456213162_thumb.jpg

CAS $80

post-84169-0-32757600-1456213263_thumb.jpg

HKS thing that goes pssssh! $80

post-84169-0-39671800-1456213464_thumb.jpg

Drivers Window switch - Ive lost one of the switches... no idea where its gone, used to be there? fkn thieves. $20

post-84169-0-07167400-1456213603_thumb.jpg

R33 Workshop manual – Yes I know you already have one on the computer but your paying for my time $20

post-84169-0-51199900-1456213717_thumb.jpg

R34 Vspec2 Pedals - come out of the R33 so fit no dramas before you ask. $120

post-84169-0-75453300-1456213852_thumb.jpg

Boot lining and carpet $20

post-84169-0-01980700-1456214395_thumb.jpg

There might be a few more things to throw up but thats it for now. Cheers.

Link to comment
https://www.sau.com.au/forums/topic/463161-r33-gtst-s2-parts-nsw/
Share on other sites

Hi interested in the intake box, would you post to Perth and how much if you do?

I dunno mate. Ill keep ya in mind. Rather not piss around as i cant drive (necks a bit... broken at the moment :s )

Sam, does the window-switch panel still stay in place when screwed in down at the back of it (like the bit where you shove your wallet)? If so, would love it. Also the rear strut bar provided it fits an S1.

I'm guessing based on your post the area you're in; I'm down there most weekends (except for lately, little girl is 2 days old now). Happy to organise something.

Located in albion park.

Just went to have a look at the window switch panel whatsit. has all the clips in tact, including the clips on the insert. Tried to pull on it, clips are holding it real good. Not sure if the strut bar fits s1 or not

Located in albion park.

Just went to have a look at the window switch panel whatsit. has all the clips in tact, including the clips on the insert. Tried to pull on it, clips are holding it real good. Not sure if the strut bar fits s1 or not

Cheers mate, I'll look into it and get back to you. I'm down in Albion park rail most weekends.

Okay, looks like it should fit fine - though does it have the brackets? (like in this item: http://www.ebay.com.au/itm/Nissan-Skyline-R33-Adjustable-Rear-Strut-Brace-JDM-/361419915749?hash=item54264e41e5:g:9QYAAOSwl9BWNCK~)

But definitely keen on the switch panel no matter what.

I'll give you a yell when I'm down next - most likely in a fortnight (little one came home today so getting settled)

  • 3 months later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...