Jump to content
SAU Community

Supra's and Circuit Racing

Bepo

By Bepo,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Bepo Collaborator

Bepo

Posted
Posted

I am considering taking my 6spd RZ Supra (240rwk) :wassup: on the track, I have adjustable height suspension, front and rear strut tower braces and good tyres but was just wondering how Supra's in general go on circuits. I hear lots about them in Drags but not so much on the track. Anyone seen em on a track or even raced against em? Obviously a lot is going to come down to the driver but I'm just curious on your opinions...

Also what kind of modification to suspension/handling are usual for track work?

B :throwup:

Link to comment
https://www.sau.com.au/forums/topic/46446-supras-and-circuit-racing/
Share on other sites
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

Hardly see any at circuits when I come to think about it.

I've seen one at Eastern creek and it was pretty quick. But there was one at Wakefield and it didn't fair all that great. But there's too much variables to say what's what.

Craved Grand Master

Craved

Posted
Posted

true, but there is one supra racing in NSW state championships... improved production i think.. would have to look into it!

goes OK, not winning any rounds that i've seen! sure it could be done, depends on budget and competition etc..

are you thinking of just doing a track day, not curcuit racing?

Bepo Collaborator

Bepo

Posted
  • Author
Posted

Dont think Ill jump straight into any series :Bang: hehe

Looking to do track days for 6-12 months with the Toyota Club and if its for me Ill apply for CAMS Level 3 (Have Level 2 atm). Once I have that I look into what i want to do next. May keep the Supra for a road car and import a 96-96 RX7 from japan which has been modified stupidly as I have seen them go for $13,000 -17,000 landed in Australia. I would feel better racing a 13k car in a series given the amount of contact that seems to occur LOL.

Anyone in SAU racing in any series around Australia, Hill Climb, Targa, Production etc?

B :bscreen:

Snowman Grand Master

Snowman

Posted
Posted

Hey Bepo,

Being in Melbourne you may know the Ice Supra - well Nige is supposed to be hitting the track with that soon (will be detuned from its current 570+rwkw's). His major concern has been brakes.

He's obtained a set of Porsche GT2 callipers to go on before he hit's the track. Maybe have a chat to him down at Ice?

Bepo Collaborator

Bepo

Posted
  • Author
Posted

SG I agree, wont be wanting to set great times first time out I just wanted to know what kind of things would improve the stability and reliability of the car on the track so I didnt either smash it or blow something up LOL.

Good point about the brakes snowman, it currently has the 97 mdl updrage discs and calipers and I am going to put performance pads on it and flush the brake system and replace with good brake fluid. Going to flush the radiator, clean the air filter and fit a new FMIC before hitting the track too.

Another racing question, the car currently has 17/45/255's Potenza's all round but given they are low tread I was thinking about fitting Toyo T1S's which I have heard good things about.

1. Anyone have any tyre suggestions?

2. Is 255 too wide on the front? Standard is 235 front and 255 back.

Bepo :)

Roy Grand Master

Roy

Posted
Posted
Another racing question, the car currently has 17/45/255's Potenza's all round but given they are low tread I was thinking about fitting Toyo T1S's which I have heard good things about.

1.  Anyone have any tyre suggestions?

2. Is 255 too wide on the front?  Standard is 235 front and 255 back.

How much are the Toyos, if they are reasonably priced then i jump at them as i have heard good things. If they are up around $500 a corner then id be going straight to Dunlop D01Js.

As for the Supra not being a good circuit car, i would disagree. They have a great tractable engine, the later models have very adequate 4 pot brakes, and they have good suspension setup.

I would think a Supra with nicely upgraded susp, a decent clutch and the usual exhaust, IC and ECU mods would make it a very quick car around Melb circuits like Sandown, Phillip Island and Calder. They arent as light as soem of the other RWD Jap cars, but look at the wheelbase and track of the thing...it would be a very good car for circuits like Phillip Island and Sandown.

Evo_Lee Experienced

Evo_Lee

Posted
Posted
As for the Supra not being a good circuit car, i would disagree. They have a great tractable engine, the later models have very adequate 4 pot brakes, and they have good suspension setup.

By right they should be, F/R track and wheelbase have a nice geometry. Don't forget they hold the quickest time for the modified class around Nurburgring circuit. As I said before get your suspension setup properly and you'll be right.

Bepo Collaborator

Bepo

Posted
  • Author
Posted

What is the best way to determine the optimal suspension config if your not an experienced racer? Trial and error is the only way I can think of apart from getting a professional to do it? Just had a thought, might be able to find the settings for track use on the internet.....

Toyo T1S are $305 a tyre at Tyrepower which I though was very good!!

Thanks guys for the info and support, its given me even more motivation to get out there and have some fun :)

I'll post the specs and pics of my car once I pick it up tommorow!

Do SAU events allow other cars to come along?.... eg. Supra's hehe.

B :(

Roy Grand Master

Roy

Posted
Posted
What is the best way to determine the optimal suspension config if your not an experienced racer?  Trial and error is the only way I can think of apart from getting a professional to do it?  Just had a thought, might be able to find the settings for track use on the internet.....

Since you are in Melb drop in to Centreline suspension in Thomastown, a simple wheel alignment will do wonders...and Chris will be able to give you great advice on a setup should any components be worn and need replacing.

.Do SAU events allow other cars to come along?.... eg. Supra's hehe.

Of course, last day at Winton we had 2 x R33 GTRs, 1 x WRX, 1 x R33 GTST and a TX5 turbo....so the more the merrier. Just keep an eye out on Vic Events :(

Craved Grand Master

Craved

Posted
Posted

you could get a set of 16" rims at 225.. and fit the semi slicks used by commodore cup cars

only $250 a corner, thats if 16" will fit. that way you can have those tyres just for the track and spend less on tyres!!

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Bepo the best way to go about not smashing is to use any instructors at the track day. They are always asking if you're a novice and want an experienced trackie to sit in the passenger seat and give some pointers.

Reliability, just make sure it's serviced and all fluids are correct levels or even a little above. I run an extra litre of engine oil, but it's a different engine. If anything seems suspect at any time just back off and head for the pits. You can never guarantee it will all be smooth sailing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • GTSBoy
      R34 Skyline Sunroof Won't Tilt/Vent

      By GTSBoy · Posted

      Something's broken.
    • PranK
      Shoota's R33 GT-R RB30/26

      By PranK · Posted

      It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...