Jump to content
SAU Community

Recommended Posts

Had a Haltec then a Motec M84 and went back to a PFC D-jetro.

The car has been running faultless ever since, no more timing issues and its a real plug in ecu.

Unless going a crank trigger I would stick with Nistune or PFC. They just work.

Put it this way.

I'd keep my car stock before a pfc again.

They are a complete waste of money. Nistune does everything it does.

And you may not want what a haltech does now, but if you do you have wasted time and money getting a half arsed ecu. May have well gone the good one from the start. Not to mention if you do get a power fc and take it to a well known tuner and they can't tune it that means more money down the drain. Let alone all the benefits a haltech brings.

I'll also point out the ecu is arguably the most important part of the car. What's an extra $1000 of you buy new? On the price of a motor it's well worth it.

Tl;dr pfc waste of money.

  • Like 1

Put it this way.

I'd keep my car stock before a pfc again.

They are a complete waste of money. Nistune does everything it does.

And you may not want what a haltech does now, but if you do you have wasted time and money getting a half arsed ecu. May have well gone the good one from the start. Not to mention if you do get a power fc and take it to a well known tuner and they can't tune it that means more money down the drain. Let alone all the benefits a haltech brings.

I'll also point out the ecu is arguably the most important part of the car. What's an extra $1000 of you buy new? On the price of a motor it's well worth it.

Tl;dr pfc waste of money.

I couldn't disagree with you anymore at this point. The higher power you go with Nistune, the worse the tune gets. O2 correction always trying to battle with the tune. I can name quite a few different people with GTRs that are considering swapping from Nistune over to PFC.

You want accurate timing with a Haltech, you kinda need a crank trigger, it jumps all over the shop without one. It's not "just an extra grand" for most people who haven't swung a spanner in their lives. PowerFC does the job, and it has been doing the job for the last 25+ years on THOUSANDS of high performance cars. You cannot possibly use confirmation bias just because you had a junk tune, and trash the ECU which thousands of people have zero issues with.

  • Like 1

There was nothing wrong with my tune, bit ecu technology has come a long way. The pfc was good. It's just not worth the $$ they ask for now. And yes it is $1000 difference and I have the receipts to prove it. You don't need a crank trigger so all.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

Because 50% of Gtr owners realise the hole they have dug themselves within a year of ownership and sell up and cut their losses. The other half bend over and open up their wallets anyway, spending a little more than a small fortune. :P

Edited by iruvyouskyrine

There was nothing wrong with my tune, bit ecu technology has come a long way. The pfc was good. It's just not worth the $$ they ask for now. And yes it is $1000 difference and I have the receipts to prove it. You don't need a crank trigger so all.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

You can get them secondhand for $400 if you wait long enough, average price is $600 for a GTR PFC. How is it half arsing? It'll go with your mods all the way up to 450kw very comfortably.. even more if you go D-Jetro..

You don't need a crank trigger so all.

Its a known issue that they have difficulty reading the cas signal which is hit and miss, just call haltec or Motec and they will clarify your error.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

Where is a nistune or PFC half arsed? You just don't get the wank factor bells and whistles that you really don't need in a street car if the tuner knows what he is doing.

The only real choice to make is to stick with the AFM or go MAP. Apart from that Nistune or PFC will manage a 400kw+ car easily and perfectly.

Edited by XGTRX

You can get them secondhand for $400 if you wait long enough, average price is $600 for a GTR PFC. How is it half arsing? It'll go with your mods all the way up to 450kw very comfortably.. even more if you go D-Jetro..

dont go second hand.

The ecu and tune is the most important part of the build.

  • Like 1

If you've built a 400kw car you have obviously spent abit of money so why would you skimp on the thing that is going to keep your car running right.

Buy the best computer your budget will allow and make sure you get it tuned by someone with the correct knowledge to tune it correctly

  • Like 2

fyp. Have you never spoken to anyone who has bought a stuffed second hand ecu?

This isn't a missile car, this is a 400+kw R. Choose parts wisely and don't cut corners.

Yes and I've had a hand in building many of those cars. I could confidently say less than 10% of those who have gone second hand, have had problems, I'm talking 40+ cars here as well.

So 90% have had problems?

I rest my case.

Okay mate, I edited my post before you posted that but if you want to be childish thats fine.

Anfanee, what exactly is a platinum pro going to do over a PFC that your average joe shmo actually NEEDS? Go on GTR PARTS on Facebook and you can pickup a PFC D-Jetro any day of the week for $700. I don't see what the issue is here?

My point is. It's a much better ecu. And it's future proof. If you end up deciding you want the extra features that $500 tune may have well gone a haltech from the start.

Also AFM are shit.

You're right on all those parts you just said, I just don't think the average person needs it, 400kw isn't even anything fancy nowadays in the GTR world. Every third GTR in Sydney seems to be minimum 350-400kw. You buy an ECU to suit your application and in most cases a PFC is going to more than cut it.

On top of that... you should be listening to your tuner anyway. If he tells you he prefers to tune Haltech or PFC, then you should definitely be listening up!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...