Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Man just when you think you're seeing the end of the need for cash spent on a GT-R you come across a thread like this?!

The GT-R was made to race right? It's a race car. I can't believe I've had to do so much to it to get it to be a race car!!!

Brakes: Definitely suck on my R32 GT-R and I'm still trying to get them to bite. I've resorted to ordering Racebrakes's best track pad at $710 a full set (damn it).  

Intercooler pipes: 1st track day, no boost restrictor and the driver side intercooler pipe blows off. It's a common problem apparently and happens all the time. WTF?! I have spent $880 on replacing all rubber pipes with a full HKS piping kit and invested big cash into an Apexi boost controller.  

Tyres: Yoko Grand Prix DNA tyres are no-where near good enough. I have just put on a set of Dunlop's best tarmac rally semi-slicks. $1500!!! Ouch but damn are they sticky or what?! Makes the car feel tight and small like driving a little mini now! :)

Noticed my oil temp going up high last track day so I just bought an HKS Oil Cooler Kit w/Remote mount: $800

And now this sump baffle stuff?! Argh! All the cash I am making is going into this car which I only drive on track and the occasional weekend. Am I complaining though? Well yes... a little but damn I love my car! This GT-R's a keeper. What an amazing machine!

Hi Justin, that's why I built a GTST this time. The brakes that weren't so good on a 1,600 kg GTR, work great on a 1,245 kg GTST. The oil surge that was so hard to fix on a GTR was never a problem on a GTST. The $2.5K clutch is now a $1.3K clutch. The transmission oil cooler simply isn't necessary when you only have 2 wheels to drive. Instead of chewing out a set of tyres per meeting it's now only a pair. The very tricky to set up 4wd suspension is so much easier now, it's a simple rear wheel drive I can do in my sleep. I didn't have 3 diffs to upgrade, only one. etc etc

The only time I want the GTR is when it rains, then a 600 bhp GTST is very tricky to drive fast. :headspin:

Hi Justin, that's why I built a GTST this time.  The brakes that weren't so good on a 1,600 kg GTR, work great on a 1,245 kg GTST.   The oil surge that was so hard to fix on a GTR was never a problem on a GTST.  The $2.5K clutch is now a $1.3K clutch.  The transmission oil cooler simply isn't necessary when you only have 2 wheels to drive.  Instead of chewing out a set of tyres per meeting it's now only a pair.  The very tricky to set up 4wd suspension is so much easier now, it's a simple rear wheel drive I can do in my sleep.  I didn't have 3 diffs to upgrade, only one.  etc etc

The only time I want the GTR is when it rains, then a 600 bhp GTST is very tricky to drive fast. :headspin:

HELP , what susp does the R32 run, i dont want o bolt in a monster engine only to never be able to crack the throttle wide open.

Of course i want to be quick at club sprints but i dont need to be the quickest, but i want the car to be faster then me and challenging to drive so my driving continues to improve...

Speaking of Excel's, I drove 1 yesterday for the first time... couldn't even overtake a semi-trailer on the freeway pos !! Had to put my arm out the window and slap it like a horse to get it up a hill grr !!

you think thats bad ben, I'll lend you the Datto sunny wagon I'm cruising at the moment till my R gets here in november. hahahah, I can't overtake a kid on his scooter at the moment!

I have purchased sump baffles from UAS for $395, they are the TOMEI ones for the GTR. supposed to be $450 but the sale was on when I got them.

as soon as the car arrives it is being shipped to the workshop and is getting a full service, the motor is coming out for the baffles, check the clutch to see if it needs a new one (can someone reccomend one for a daily driver? nice easy one) and the usual, all fliuds and filters, plugs, timing belt, water pump etc

no point in taking risks I say, the service and compliance with all the fitting should be around 3600 I was told, but I think its worth the risk. I like track days and the occasional dawn run so this shuold be ok

mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...