R33gtr And R33gtst Fuel Tank Brackets

[Meathead]

Going to remove my Bosch 044 + surge tank and fit a Pierburg/Walbro 360l pump in the tank and want to stick it in the bottom with a 30 micron sock.

I see lots of people drop the whole r33gtr pump assembly into a r33 gtst with no dramas.

Anyone used the gtst bracket in a gtr so as to site the pump lower.

The Pierbug has no problem sucking as its positive displacement but the suction is big and I cannot find any 15mm id intank hose so need it parked at the bottom gtst style.

No problem to bend bracket to suit just wondering if anyone has gone this way.

Will be pushing 450awkw shortly on Jap high octane so need to upgrade.

[Piggaz]

I have a Walbro 460 lift pump in mine. The cradle was out of some other Nissan. I'll be out at the workshop either tomorrow or Wednesday so i'll ask the guys what car is came out of.

[Dose Pipe Sutututu]

Use S14 or R33 GTS/-t brackets. I assume S15 and R34 ones will fit too, however cannot confirm the "prongs" on the brackets line up to the tank wall.

[Meathead]

I have a Walbro 460 lift pump in mine. The cradle was out of some other Nissan. I'll be out at the workshop either tomorrow or Wednesday so i'll ask the guys what car is came out of.

Much appreciated!!